Panasonic PT-D3500E Dlp Projector - English/ French - Page 50
Error Information Input Air Temp.sensor
View all Panasonic PT-D3500E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Using Web Browser Control Error information page When is displayed on the status information screen, click it to display the error details. OK: Normal operation FAILED: Occurrence of trouble Note • Depending on the nature of the error, the projector may be placed in the standby mode for its own protection. When [FAILED] has appeared for an item Parameter MAIN CPU BUS FAN OPTICS MODULE TEMPERATURE INPUT AIR TEMPERATURE AROUND LAMP TEMPERATURE LAMP REMAIN TIME LAMP STATUS SHUTTER OPTICS MODULE TEMP.SENSOR INPUT AIR TEMP.SENSOR BATTERY COLOR WHEEL Description Trouble has occurred in the microcomputer circuitry. Consult your dealer. Trouble has occurred in the fan or its drive circuit. Consult your dealer. The temperature inside the projector is high. It may be that the projector is being used where the ambient temperature is high such as near a heating appliance. The input air temperature is too high. It may be that the projector is being used where the ambient temperature is high such as near a heating appliance. The temperature near the lamp has risen very high. Something may be blocking the exhaust vent. The lamp runtime has exceeded the prescribed cumulative time, and it is now time to replace the lamp. The lamp has failed to light. Wait a short while for the lamp to cool off, and then turn on the power. Trouble has occurred in the shutter circuitry. Consult your dealer. Trouble has occurred in the temperature detection sensor inside the projector. Consult your dealer. Trouble has occurred in the sensor used to detect the input air temperature. Consult your dealer. The backup battery has been run out. Consult your dealer. Trouble has occurred in the color wheel or the color wheel drive circuit. Consult your dealer. 50