Panasonic PT-D6000ULK Functional Instructions - Page 37
Network Menu, Network Control
UPC - 791871111871
View all Panasonic PT-D6000ULK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
NETWORK menu Remote control See "Navigating through the menu" on page 15. See "Main menu and Sub-menu" on page 12. NETWORK SETUP Make the initial network settings before using the network connection. 1. Select the required item to change. 2. Press the ENTER button. 3. Use F G I H to change the settings. 4. Select STORE and press the ENTER button. The confirmation screen will be displayed. Select OK and press the ENTER button. HOST NAME DHCP IP ADDRESS SUBNET MASK DEFAULT GATEWAY STORE Change as needed when using a DHCP server. ON: When using DHCP server, automatically acquire an IP ADDRESS. OFF: IP ADDRESS need to be entered manually. Enter correct IP ADDRESS numbers. When DHCP is ON, automatically filled. Enter correct SUBNET MASK numbers. When DHCP is ON, unnecessary to fill. Enter correct DEFAULT GATEWAY numbers. When DHCP is ON, unnecessary to fill. Save the above settings. NOTE: • Make sure the DHCP server is ready to use. • For details of IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY, ask the network administrator. NETWORK CONTROL You can switch on/off the projector network controlling method. 1. Select the required item to change. 2. Press the ENTER button. 3. Use I H to change the settings. 4. Select STORE and press the ENTER button. The confirmation screen will be displayed. Select OK and press the ENTER button. WEB CONTROL PJLink CONTROL COMMAND CONTROL*1 COMMAND PORT STORE For when controlling from a computer with the web browser. For when controlling from a computer with the PJLinkTM protocol. For when controlling from a computer via SERIAL terminal. Enter the command port number for COMMAND CONTROL. Save the above settings. *1. If settings have been made without an administrator password of the web browser control, add 2-byte "00" instead of STX, and a line-feed code (0Dh) instead of ETX. If settings have been made with an administrator password, of the web browser control, add a 32-byte hash value and "00" instead of STX and a line-feed code (0Dh) instead of ETX. The hash value is created by MD5 combining "admin1:", password, ":" and random numbers. The random numbers are 8-byte values sent from the projector when connecting. NETWORK STATUS You can display the current network status of the projector. Press the ENTER button to display. DHCP IP ADDRESS SUBNET MASK DEFAULT GATEWAY DNS1 DNS2 MAC ADDRESS Settings ENGLISH - 37