Panasonic PT-F200U Operating Instructions

Panasonic PT-F200U Manual

Get Panasonic PT-F200U PDF manuals and user guides View all Panasonic PT-F200U manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic PT-F200U manual content summary:

  • Panasonic PT-F200U | Operating Instructions - Page 1
    Operating Instructions LCD Projector Commercial Use Model No. PT-F200NTU PT-F200U Before operating this product, please read the instructions carefully and save this manual for future use. TQBJ0248 ENGLISH
  • Panasonic PT-F200U | Operating Instructions - Page 2
    that you will be pleased with your Panasonic LCD projector. The serial number of your product may be found on its bottom. You should note it in the space provided below and retain this booklet in case service is required. Model number: PT-F200NTU / PT-F200U Serial number: WARNING: TO REDUCE THE
  • Panasonic PT-F200U | Operating Instructions - Page 3
    Model Number: PT-F200NTU / PT-F200U Trade Name: Panasonic Responsible party: Panasonic Corporation of North America Address: One Panasonic Way, Secaucus, New Jersey 07094 Telephone number: (888) 411 - 1996 E-mail: [email protected] This device complies with Part 15 of
  • Panasonic PT-F200U | Operating Instructions - Page 4
    this first 10 Minimum required setting screen 10 About Your Projector 11 Remote control 11 Projector body 12 Getting Started Setting up 14 Screen size and throw distance 14 Projection method 15 Front leg adjusters and throwing angle 15 Lens shift and positioning 16 Connections 18 Before
  • Panasonic PT-F200U | Operating Instructions - Page 5
    Protections du support de montage au plafond 61 LAMP, TEMP and ARF Indicators 39 Managing the indicated problems 39 Care and Replacement 40 Cleaning the projector 40 Replacing the ARF (Auto Rolling Filter 40 Replacing the Lamp unit 41 Ceiling mount bracket safeguards 42 Troubleshooting 43
  • Panasonic PT-F200U | Operating Instructions - Page 6
    dropped or the cabinet is broken, disconnect the power plug from the wall socket. Continued use of the projector in this condition may result in fire or electric shocks. Contact an Authorized Service Center for repairs. Do not overload the wall socket. If the power supply is overloaded (for example
  • Panasonic PT-F200U | Operating Instructions - Page 7
    replacing the lamp, be sure to disconnect the power plug from the wall socket. Electric shocks or explosions can result if this is not done. Do not allow infants or pets to touch the remote control unit. Keep the remote Do not set up the projector outdoors. The projector is designed for indoor use
  • Panasonic PT-F200U | Operating Instructions - Page 8
    leaving the remote control with replacement of the lamp unit and check the inside of the projector. Ask an Authorized Service Center to clean inside the projector at least once a year. If dust is left to build up inside the projector without being cleaned out, it can result in fire or problems
  • Panasonic PT-F200U | Operating Instructions - Page 9
    . The Authorized Service Center will never ask you for the password. Do not share your password with anyone else. Accessories Make sure the following accessories are provided with your projector. Remote control for PT-F200NTU*1 (x1) N2QAYB000152 Remote control for PT-F200U*2 (x1) N2QAYB000154
  • Panasonic PT-F200U | Operating Instructions - Page 10
    installation method. Press G to proceed to the ALTITUDE setting. PLEASE SELECT LANGUAGE SELECT ENTER Press F G I H buttons of the Remote control or Control panel on the projector to highlight the required language, and press ENTER to proceed to the next setting. J OPTION Select the current
  • Panasonic PT-F200U | Operating Instructions - Page 11
    Projector Remote (page 25) Reset some of the settings to the factory default settings. (page 25) MULTI-LIVE is only for PT-F200NTU. See CD Remote control. • Do not attempt to modify or disassemble the Remote control. Contact an Authorized Service Center for repairs. • Do not keep pressing the Remote
  • Panasonic PT-F200U | Operating Instructions - Page 12
    Preparation About Your Projector Projector body J Top and front view Indicators POWER indicator (page 20) LAMP indicator (page 39) TEMP indicator (page 39) FILTER indicator (page 39) Remote control signal receptor (page 23) ALS (Ambient Luminance Sensor) (page 30) Lens shift lever (page 16) Air
  • Panasonic PT-F200U | Operating Instructions - Page 13
    Filter) compartment (page 40) Font leg adjusters Screw up/down to adjust the projection angle. (page 15) About Your Projector Lamp projector. (page 20) LAN Connect a LAN cable for network connection. This terminal is PT Serial terminal" on page 45. REMOTE See "REMOTE terminal" on page 47. COMPUTER
  • Panasonic PT-F200U | Operating Instructions - Page 14
    0606 x SD (") - 0.057 * The results above are approximate and may differ slightly from the actual measurements. NOTE: • See "Screen size and throw distance for 16:9 aspect ratio" on page 50. • Do not use the projector at a raised or a horizontally tilted position as it may cause malfunction of the
  • Panasonic PT-F200U | Operating Instructions - Page 15
    ) is required. • See "Ceiling mount bracket safeguards" on page 42. Front leg adjusters and throwing angle You can screw up/down the front leg adjusters to control the angle of the projector for adjusting the throwing angle. See "Positioning the image" on page 22. NOTE: • Heated air comes out of
  • Panasonic PT-F200U | Operating Instructions - Page 16
    Lens shift lever to adjust the projected image position. 4. Screw the Lens shift lever clockwise to lock. Q Horizontal shift You can place the projector where the projector lens is up to 32% horizontally off-center from the screen and then adjust the image position with the Lens shift lever. Up to
  • Panasonic PT-F200U | Operating Instructions - Page 17
    when the Lens shift lever is at the horizontal limit of the shift range, you cannot move the lever to the horizontal limit. • When the projector is tilted and you adjust KEYSTONE, the center of the screen and the lens need to be realigned. • Do not attempt to pull the Lens
  • Panasonic PT-F200U | Operating Instructions - Page 18
    Connections Before connection to the projector Read and follow the operating and connecting instructions of each peripheral device. (PT-F200NTU only) ACT lamp (Green) Flashes when transmit data. LINK lamp (Yellow) Illuminates when a LAN cable is connected. NOTE: • Do not touch the metal parts of
  • Panasonic PT-F200U | Operating Instructions - Page 19
    Video player To video output or audio output Audio system DVD player NOTE: • When you connect more than one AV equipment, switch the audio connection manually. J Connecting with COMPONENT IN Video player To audio output DVD player Audio system ENGLISH - 19
  • Panasonic PT-F200U | Operating Instructions - Page 20
    . Network connection is ready while the POWER is turned off. (PT-F200NTU only) The POWER is switched on and the projector is getting ready to project. The projector is ready to project. The POWER is switched off and the projector is cooling the lamp. The POWER is switched on again when cooling the
  • Panasonic PT-F200U | Operating Instructions - Page 21
    flicker for the characteristics of the lamp. Those are normal and will not affect the performance of the projector. • When the internal cooling fan page 35. Switching off the projector Basic Operation 1. Open the Front panel cover. This is not necessary in Remote control operation. 2. Press the
  • Panasonic PT-F200U | Operating Instructions - Page 22
    OPTION menu. See "TEST PATTERN" on page 36. Focus lever Zoom lever 3. Adjust the angle of the projector. Screw down the Front leg adjusters and adjust the angle vertically. See "Front leg adjusters and throwing angle" on page 15. NOTE: • Do not touch the Air Exhaust port as this may cause burns
  • Panasonic PT-F200U | Operating Instructions - Page 23
    operation Operating range You can operate the projector with the Remote control within the remote range 15 m (49'2"), approximately ± 30° vertically and horizontally. Q Facing to the projector Ensure the Remote control emitter is facing to the Remote control signal receptor on front/back of
  • Panasonic PT-F200U | Operating Instructions - Page 24
    Basic Operation Remote control operation Switching the input signal You can switch the input method manually by pressing the COMPUTER, NETWORK (PT-F200NTU only) selected input method which is highlighted in yellow. See "INPUT GUIDE" on page 34. J Pressing the COMPUTER button COMPUTER1 COMPUTER2 J
  • Panasonic PT-F200U | Operating Instructions - Page 25
    button of the Remote control. Display the required sub menu or the menu items and press the DEFAULT button again. See "Main menu and Sub-menu" on page 28. NOTE: • Some menu items are not available to reset by pressing the DEFAULT button. Adjust each menu items manually. • To reset all the settings
  • Panasonic PT-F200U | Operating Instructions - Page 26
    Remote control operation Enlarging the centered area You can enlarge the projected image down to a centered area for emphasizing within the range of 1x to 2x. Q
  • Panasonic PT-F200U | Operating Instructions - Page 27
    to access functions which do not have their own dedicated buttons on the Remote control. The menu options are structured and categorized. You can navigate through menu. NOTE: • See "Resetting to the factory default settings" on page 25 to reset each menu items. • See "INITIALIZE ALL" on page 36
  • Panasonic PT-F200U | Operating Instructions - Page 28
    Menu Navigation Main menu and Sub-menu The Main menu has 6 options. Select the required menu item and press ENTER to display the Sub-menu. NOTE: • Some default settings vary by the selected input signal. • Sub-menu items vary according to the selected input signal. • Some settings are adjustable
  • Panasonic PT-F200U | Operating Instructions - Page 29
    GUIDE STARTUP LOGO COMPUTER2 SELECT FILTER REMAINING LAMP RUNTIME POWER OFF TIMER DIRECT POWER ON CONTROL PANEL AUTO SETUP SIGNAL SEARCH INSTALLATION ALTITUDE CLOSED CAPTION SETTING TEST PATTERN DETAILED SETUP SECURITY NETWORK (PT DETAILED SIMPLE OFF ON OFF USER INPUT OUTPUT OFF 15 MIN.
  • Panasonic PT-F200U | Operating Instructions - Page 30
    PICTURE menu Remote control Control panel COLOR You can adjust the color saturation ON: Active OFF: Deactive NOTE: • Do not cover the ALS (Ambient Luminance Sensor) of the projector. See "ALS (Ambient Luminance Sensor)" on page 12. • AUTO is not available when INSTALLATION setting
  • Panasonic PT-F200U | Operating Instructions - Page 31
    . J For S-VIDEO/VIDEO signals Q TV-SYSTEM When the video signal is changed, the setting switches automatically. You can switch the setting manually to match the video data. Press I H to cycle through the options. AUTO NTSC SECAM NTSC 4.43 PAL-N PAL PAL-M NOTE: • AUTO setting will select
  • Panasonic PT-F200U | Operating Instructions - Page 32
    menu Remote control . (Available with signals from COMPUTER only) KEYSTONE If the projector is aligned non-perpendicularly to the screen, or if the projection may not make a difference. ASPECT You can switch the aspect ratio manually when needed. Press I H to cycle through the options. 4:3 16
  • Panasonic PT-F200U | Operating Instructions - Page 33
    RESIZING is set to OFF; • The size of the image will be projected smaller and you may need to adjust ZOOM and FOCUS, or the projector position backwards and forwards. • DIGITAL ZOOM, KEYSTONE and INDEX-WINDOW are not available. Q AUTO The S1 signal which contains an identifying signal will be
  • Panasonic PT-F200U | Operating Instructions - Page 34
    on page 40. • After you replace the ARF, FILTER REMAINING should be reset to "0" by pressing the ENTER button for 3 seconds. LAMP RUNTIME You can check how long the lamp has been used. NOTE: • LAMP RUNTIME is a relevant matter for lamp replacement timing. See "Replacing the Lamp unit" on page 41
  • Panasonic PT-F200U | Operating Instructions - Page 35
    See "Remote control" on page 11. 25 MIN. 30 MIN. 35 MIN. 50 MIN. 45 MIN. 40 MIN. DIRECT POWER ON You can switch the projector start rear Mounting in the ceiling and projecting from rear ALTITUDE If you use the projector at high elevation, the ALTITUDE setting need to be HIGH to set the fan
  • Panasonic PT-F200U | Operating Instructions - Page 36
    sound plays through the right side J INITIALIZE ALL You can reset all of the customized settings to the factory defaults except NETWORK, LAMP RUNTIME and FILTER REMAINING menu settings. 1. Press the ENTER button 2. Turn off the projector by pressing the POWER button. 3. Switch off the MAIN POWER
  • Panasonic PT-F200U | Operating Instructions - Page 37
    SECURITY menu Remote control Control panel See "Navigating through the MENU" on page 27. See "Main menu and Sub-menu" on page 28. J Entering the SECURITY menu Every
  • Panasonic PT-F200U | Operating Instructions - Page 38
    menu Remote control Control panel See "Navigating through the MENU" on page 27. See "Main menu and Sub-menu" on page 28. NOTE: • The NETWORK menu is available only with PT-F200NTU. • See the PJ Link or network information in the contents of the CD-ROM which is provided with the projector. Items
  • Panasonic PT-F200U | Operating Instructions - Page 39
    status of all indicators and projector, and switch off the projector in proper way. 2. Find out the cause of the problem by status of the LAMP, TEMP and/or FILTER indicators. 3. Follow the instruction for each indication below and solve the problem. 4. Turn on the projector in the correct way and
  • Panasonic PT-F200U | Operating Instructions - Page 40
    in altered or damaged surface of the projector. If you use a chemical treated wipe, follow the instructions supplied with it. J Cleaning the . Replacing the ARF (Auto Rolling Filter) J Before replacing the ARF Press the POWER button for at least 0.5 seconds or press twice to turn off the projector.
  • Panasonic PT-F200U | Operating Instructions - Page 41
    I to select OK and press the ENTER button to reset FILTER REMAINING to "0". See "FILTER REMAINING" on page 34. FILTER REMAINING RESET A REMAIN OF A FILETER. OK SELECT CANCEL RETURN ENTER Replacing the Lamp unit J Before replacing the Lamp unit Switch off the MAIN POWER and disconnect the power
  • Panasonic PT-F200U | Operating Instructions - Page 42
    Lamp unit cover fixing screws on the back of the projector until the screws turn freely, and remove the Lamp unit cover. Lamp unit cover 5. Replace the new Lamp unit in correct direction. Lamp ceiling mount bracket according to the installation instructions. 2. Loop the security cable around the
  • Panasonic PT-F200U | Operating Instructions - Page 43
    Troubleshooting Should any problem persist, contact your dealer. Problem Cause Power does not turn on. No picture appears. The picture is fuzzy. The color is pale or greyish. No sound can be heard from the internal speaker. The control buttons of the projector do not operate. The Remote control
  • Panasonic PT-F200U | Operating Instructions - Page 44
    *2 Terminals NTSC/NTSC 4.43/ PAL-M/PAL60 PAL/PAL-N/SECAM 480i 576i 480p 576p 1 080/60i 1 080/50i 720/60p*4 720/50p VESA VGA480 SVGA MAC XGA MXGA MAC MSXGA SXGA SXGA60+ UXGA WXGA768 WXGA800 WXGA+ WSXGA+ WUXGA 720 x 480i 720 x 576i 720 x 480i 720 x 576i 720 x 483 720 x 576 1 920 x 1 080i
  • Panasonic PT-F200U | Operating Instructions - Page 45
    start with STX, and proceed to Command, Parameter and end with ETX. You can add the required parameter. The projector can not receive any command for 10 seconds after the lamp is switched on. Wait 10 seconds before sending the command. If sending multiple commands, check that a response has been
  • Panasonic PT-F200U | Operating Instructions - Page 46
    Projector NC NC PC (DTE) NC NC NC J Control commands Command PON POF AVL IIS Q$S OSH Control contents Power ON Power OFF Volume INPUT Lamp signals while the INPUT GUIDE is set to DETAILED, the computer connection guidance will be displayed. Manufacturer Panasonic NEC Key command Manufacturer
  • Panasonic PT-F200U | Operating Instructions - Page 47
    COMPUTER2 COMPONENT VIDEO Short Short Open S-VIDEO Open Short Short NETWORK (PT-F200NTU only) NOTE: • When pin A and pin I are short-circuited, the buttons on the projector's control panel, POWER and INPUT SELECT buttons on the Remote control cannot be used. In addition, the RS-232C commands and
  • Panasonic PT-F200U | Operating Instructions - Page 48
    LCD panel Display method 3 transparent LCD panels (RGB) Drive method Active matrix method Lens Lamp Pixels 786 432 (1 024 x 768) x 3 panels Manual zoom (2x)/Manual focus F 1.7 - 2.6, f 21.6 mm - 43.0 mm UHM lamp - 300" (838.2 mm - 7 620 mm) Throw distance 1.2 m - 18.1 m (3'11" - 59'4")
  • Panasonic PT-F200U | Operating Instructions - Page 49
    ) SERIAL D-sub 9-pin RS-232C compatible REMOTE D-sub 9-pin For external control LAN (RJ-45) (PT-F200NTU only) Single - line, For network connection 10 Base-T/100Base-TX/1000Base-T Wireless LAN (PT-F200NTU only) Compatible Wireless channel Distance IEEE802.11b/IEEE802.11g (Wireless LAN
  • Panasonic PT-F200U | Operating Instructions - Page 50
    Technical Information Screen size and throw distance for 16:9 aspect ratio Projection size (16 : 9) Throw distance (L) Screen Diagonal (SD) Screen height (SH) Screen width (SW) Minimum distance (LW) Maximum distance (LT) (0.84 m) 33" 0.41 m (1'4") 0.73 m (2'4") 2.1 m (6'10") (1.02 m) 40
  • Panasonic PT-F200U | Operating Instructions - Page 51
    53 (2 - 1/16") 432 (17") 85.4 (3 - 11/32") Trademark acknowledgements VGA and XGA are trademarks of International Business Machines Corporation. S-VGA is a registered trademark of the Video Electronics owners. Appendix These Operating Instructions are printed on recycled paper. ENGLISH - 51
  • Panasonic PT-F200U | Operating Instructions - Page 52
    ALL 36 INPUT GUIDE 34 INPUT PASSWORD 37 INPUT SELECT Control panel button 12 Remote control button 11 Selecting 22, 24 INSTALLATION Menu 35 Projection method 15 K KEYSTONE 32 L LAMP Indicator 12 Indicator status 39 LAMP RUNTIME 34 Lamp unit compartment 13 Replacing 41 LAN 13
  • Panasonic PT-F200U | Operating Instructions - Page 53
    36 TEXT CHANGE 37 TEXT DISPLAY 37 Throw distance 16:9 50 4:3 14 Throwing angle 15 TINT 30 Troubleshooting 43 TV-SYSTEM 31 V VARIABLE AUDIO OUT 13 VIDEO Remote control 24 Remote control button 11 VIDEO IN 13 VOLUME 36 Remote control 26 Remote control button 11 W WHITE BALANCE 31 WIDE
  • Panasonic PT-F200U | Operating Instructions - Page 54
    vous serez satisfait de votre projecteur LCD Panasonic. Le numéro de série de votre produit se trouve sous le projecteur. Veuillez le noter dans l'espace ci-dessous prévu à cet effet et conserver cette notice en cas de maintenance requise. Numéro de modèle: PT-F200NTU / PT-F200U Numéro de série
  • Panasonic PT-F200U | Operating Instructions - Page 55
    et utilisé conformément aux instructions fournies avec celuici, peut provoquer mobile et requiert de respecter une distance minimum de 20 cm entre l'antenne PT-F200NTU / PT-F200U Désignation commerciale:Panasonic Fabricant responsable: Panasonic Corporation of North America Adresse: One Panasonic
  • Panasonic PT-F200U | Operating Instructions - Page 56
    s'il est installé au plafond. Si l'installation n'est pas faite correctement, cela peut entraîner des blessures ou des chocs électriques. Ne pas utiliser un support de montage au plafond qui n'est pas agréé. Si de l'eau ou des objets étrangers pénètrent dans le projecteur, si le projecteur tombe, ou
  • Panasonic PT-F200U | Operating Instructions - Page 57
    la laisse tomber et des blessures et des mauvais fonctionnements peuvent s'ensuivre. Lors du remplacement de la lampe, la laisser refroidir pendant au moins une heure avant de la manipuler. Le couvercle de la lampe devient très chaud, et on risque de se brûler si on le touche. Avant de remplacer
  • Panasonic PT-F200U | Operating Instructions - Page 58
    la télécommande pendant une longue période, cela risque de provoquer des fuites, une hausse anormale de la température interne ou une explosion. Si la lampe s'est cassée, ventiler immédiatement la pièce. Ne pas toucher ni approcher le visage des morceaux cassés. Le non respect de cette consigne peut
  • Panasonic PT-F200U | Operating Instructions - Page 59
    uniquement par un technicien qualifié. Voir « Protections du support de montage au plafond » à la page 44 peut raccourcir la durée de vie de la lampe ou d'autres composants. Précautions lors de ceci n'affecte pas le bon fonctionnement de votre LCD. Écran N'appliquer aucun produit volatil qui risque
  • Panasonic PT-F200U | Operating Instructions - Page 60
    un tournevis cruciforme. Contacter un centre de service aprés-vente agréé pour acheter une L'Unité de la lampe (ET-LAF100) de rechange. En cas la lampe, telles que la durée de garantie, se reporter aux instructions fournies avec l'Unité de la lampe. • Lorsque la durée d'utilisation de la lampe dé
  • Panasonic PT-F200U | Operating Instructions - Page 61
    de fixation de l'Unité de la lampe Appuyer ici 8. Fixer le Couvercle de la lampe puis resserrer les 2 vis du Couvercle de la lampe à l'aide du tournevis cruciforme. Protections du support de montage au plafond Bien que le projecteur ainsi que le support d'installation au plafond aient été conçus
  • Panasonic PT-F200U | Operating Instructions - Page 62
    handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. Projectors Panasonic Projector Systems Company Unit of Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 (201) 392 - 6591 Technical Support: (888) 411 - 1996 FAX: (201) 348 - 7523 E-Mail: projectorsupport
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
E
NGLISH
Operating Instructions
LCD Projector
Model No.
PT-F200NTU
PT-F200U
Before operating this product, please read the instructions carefully and save this manual for future use.
TQBJ0248
Commercial Use