Panasonic PT-F200U Operating Instructions - Page 24
Switching the input signal, Using the laser pointer, Pressing the INPUT SELECT - projector manual
View all Panasonic PT-F200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Basic Operation Remote control operation Switching the input signal You can switch the input method manually by pressing the COMPUTER, NETWORK (PT-F200NTU only) and VIDEO buttons. Press the required button several times or I H to cycle through the input methods as follows. The actual projected image will be changed in a while. The graphical guidance will be displayed on the upper right of the projected image and you can confirm the selected input method which is highlighted in yellow. See "INPUT GUIDE" on page 34. J Pressing the COMPUTER button COMPUTER1 COMPUTER2 J Pressing the NETWORK button The NETWORK button is only for PT-F200NTU. See CD-ROM contents for more detailed information. J Pressing the VIDEO button VIDEO S-VIDEO COMPONENT J Pressing the INPUT SELECT button on the projector COMPUTER1 COMPUTER2 NOTE: • Only when the COMPUTER2 SELECT is set to INPUT, you can switch between COMPUTER1 and COMPUTER2. NETWORK S-VIDEO COMPONENT VIDEO NETWORK is only for PT-F200NTU. NOTE: • If you select an unplugged input method, the guidance will blink on and off several times. • See "List of compatible signals" on page 44. • See "Connections" on page 18. Using the laser pointer You can highlight items on the screen with the red laser pointer while projecting the image in presentations or visual demonstrations as an eye-catching pointing device. Hold down the LASER button to goes on the laser pointer and release to goes off. NOTE: • The laser pointer should never be projected directly into the eyes of a person or animal. • Do not aim the laser at reflective surfaces. • Do not allow children to use laser pointer. • Never look directly into the laser beam. • The laser pointer is not effective with translucent screens. • Please read the cautions on the Remote control. • This is a Class 2 laser product. J Deactivating the LASER button You can deactivate the LASER button for an accidental operation. 1. Open the battery compartment cover of the Remote control. 2. Slide the switch tab. 3. Close the battery compartment cover of the Remote control. See "Battery compartment" on page 11. Top view Laser pointer beam emitter Cautions Deactivating switch On Off CAUTION: Use of controls of adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. ENGLISH - 24