Panasonic PT-F200U Operating Instructions - Page 25

Basic Operation Remote control operation Capturing an image When projecting an image, press FREEZE to capture the projected image and display it on the screen as a still picture. While the image is frozen, the sound will be stopped. Press the FREEZE button to return to the projection. NOTE: • Not available with NETWORK signals. Stopping the projection temporary You can turn off the lamp and stop the Press the SHUTTER button to return to the projection. projection temporary for electrical power save. Resetting to the factory default settings You can reset most of the customized settings to the factory defaults by pressing the DEFAULT button of the Remote control. Display the required sub menu or the menu items and press the DEFAULT button again. See "Main menu and Sub-menu" on page 28. NOTE: • Some menu items are not available to reset by pressing the DEFAULT button. Adjust each menu items manually. • To reset all the settings to the factory defaults, see "INITIALIZE ALL" on page 36. Projecting an image in INDEX-WINDOW mode You can project an image in split 2 windows as an INDEX-WINDOW, one is frozen, stored in memory and displayed on the screen's left side, while the display of subsequent images continues on the right. To escape from the INDEX-WINDOW, press the MENU or RETURN button. Q Changing the image size Press F G to capture a new image and change the size in 3ways. Frozen image Projected image Frozen image Continuing image Continuing image Q Switching the position In default, the frozen image is displayed on the left and the subsequent image is displayed on the right. Press I H to switch the position. Frozen image Continuing image NOTE: • If you change the window size, the aspect ratio of the image is changed and becomes vertically elongated. Q Capturing a new image While in INDEX-WINDOW mode, press ENTER to capture a new image and the frozen image window will be updated in a while. Continuing image Frozen image ENGLISH - 25