Panasonic PT-LB90NTU Lcd Projector - Page 11

Preparation Read this first Read this first When you start the projection for the first time or after the projector is initialised (Æpage 42), the LANGUAGE menu and the INITIAL SETTING menu will be displayed. Set those menus according to the usage conditions and environment. The setting can be changed by navigating through the ON SCREEN MENU. JJLANGUAGE Select the required language setting. (Æpage 35) 1111 Press buttons of the remote control or control panel on the projector to highlight the required language. JJINITIAL SETTING Select the required setting of INSTALLATION and HIGH ALTITUDE MODE. 1111 Press ▲▼buttons to select the required menu. 2222 Press ◄►buttons to change the settings of INSTALLATION or HIGH ALTITUDE MODE. INITIAL SETTING INSTALLATION FRONT/DESK PLEASE SELECT LANGUAGE SELECT ENTER 2222 Press the ENTER button to proceed to the next INITIAL SETTING menu. HIGH ALTITUDE MODE OFF SWITCH TO HIGH ALTITUDE MODE "ON" IF OVER 1400m(4593Ft). SELECT RETURN ENTER zzINSTALLATION (Æpage 16, 39) FRONT/ Setting on a desk/floor and DESK projecting from front FRONT/ CEILING Mounting in the ceiling with a ceiling mount bracket (sold separately) and projecting from front REAR/ DESK Setting on a desk/floor and projecting from rear (Translucent screen is required) REAR/ CEILING Mounting in the ceiling with a ceiling mount bracket (sold separately) and projecting from rear (Translucent screen is required) zzHIGH ALTITUDE MODE (Æpage 8, 39) OFF For use in normal environment ON For use at high altitude (above 1 400 m (4 593 ft)) 3333 Press the ENTER button to finish. Remarks zzTo return to the LANGUAGE menu, press the RETURN button in the INITIAL SETTING menu. ENGLISH - 11