Panasonic PT-RS11KU 12 000lm / SXGA / 3-Chip DLP™ Laser Projector Operat - Page 159

Chapter 4 Settings - [NETWORK] menu [DIGITAL LINK MENU] When the optional DIGITAL LINK output supported device (Model No.: ET‑YFB100G, ET‑YFB200G) is connected to the terminal, the main menu of the connected DIGITAL LINK output supported device is displayed. Refer to the Operating Instructions of the DIGITAL LINK output supported device for details. Note ff [DIGITAL LINK MENU] cannot be selected when [EXTRON XTP] is set to [ON]. ff The operation guidance for the "RETURN" button is in the menu screen of the Digital Interface Box and DIGITAL LINK Switcher. The projector does not have the "RETURN" button, but the same operation is available with the button. [Art-Net SETUP] Make settings to use the Art-Net function. 1) Press as to select [Art-Net SETUP]. 2) Press qw to select an item. ffThe items will switch each time you press the button. [OFF] [ON(2.X.X.X)] [ON(10.X.X.X)] [ON(MANUAL)] Disables the Art-Net function. Enables the Art-Net function and sets the IP address to 2.X.X.X. Enables the Art-Net function and sets the IP address to 10.X.X.X. Enables the Art-Net function and uses the IP address set in [NETWORK SETUP]. ffWhen other than [OFF] is selected, proceed to Step 3). 3) Press the button. ffThe [Art-Net SETUP] screen is displayed. 4) Press as to select an item, and press qw to switch the setting. [NET] [SUB NET] [UNIVERSE] [START ADDRESS] Enter [NET] to be used when the projector processes Art-Net. Enter [SUB NET] to be used when the projector processes Art-Net. Enter [UNIVERSE] to be used when the projector processes Art-Net. Enter [START ADDRESS] to be used when the projector processes Art-Net. 5) Press as to select [STORE], and press the button. 6) When the confirmation screen is displayed, press qw to select [OK], and press the button. Note ff If [ON(2.X.X.X)] or [ON(10.X.X.X)] is selected, IP address is calculated and set automatically. [Art-Net CHANNEL SETTING] Set the assignment of the channel. For the channel definitions used for controlling the projector with the Art-Net function, refer to "Using Art-Net function" (x page 193). 1) Press as to select [Art-Net CHANNEL SETTING]. 2) Press qw to switch the item. [2] [USER] [1] Uses the channel assignment in standard setting. Changes the channel assignment. Uses the channel assignment with DZ21K series compatible. DZ21K series: DZ21K series, DS20K series, DW17K series, DZ16K series ffWhen [2] or [1] is selected, pressing the button displays the function assigned to the channel. ffWhen [USER] is selected, proceed to Step 3). 3) Press the button. ffThe [Art-Net CHANNEL SETTING] screen is displayed. 4) Press as to select the channel to set, and pressqw to switch the item. ENGLISH - 159