Panasonic PT56DLX76 PT56DLX76 User Guide - Page 38

Projection Display operation (continued) Using the CH/VOL Button Select desired channel: Press CH or NUMBER keys. Adjust to desired volume level: Press VOL + or VOL -. Notes: • The channel number and volume level are stored even after the unit is turned off. • Power consumption can be reduced if the volume level is lowered. Channel and Program Tuning Channel and Program tuning in digital television differs from conventional television. With DTV, many programs can exist within a single 6 MHz channel. These channels behave as sub-channels within a single channel. When tuning to a digital channel, the unit will also tune to a program and will indicate the channel and program in the on-screen Channel Banner display. In order to select channels properly, Auto program must be performed. (p. 33) Follow the procedure below to directly enter the channel number using the NUMBER keys on the Remote Control. Select analog channel 1 Press the NUMBER keys on the Remote Control to enter the Channel number. Press OK. The following is an example of tuning to channel 15. 2 Direct Tuning Example Step Action Channel Banner Display 1 Press 1 1 2 Press 5 15 3 Press OK 15 Note: • If, during channel selection, no action is taken for several seconds, the Channel Banner is exited and the currently input channel is automatically selected. 3 Direct Tuning Example Step Action Channel Banner Display 1 Press 1 1 2 Press 5 15 3 Press - 15- 4 4 Press 1 5 Press OK 15-1 15-1 Note: • If, during channel selection, no action is taken for several seconds, the Channel Banner is exited and the currently input channel is automatically selected. Unit Status display Press the Channel or RECALL button, except when the MENU screen is displayed, to display current unit status information. Channel Banner: Minimized Press CH to minimize the displayed channel banner. It will display the channel number, and the station identification (if available). Channel Number 15-2 ABC - HD Station Identifier Note: • The Station identifier is not displayed when you use Split Screen mode. Channel Banner: Maximized Press RECALL to maximize the displayed channel banner. 38 Select digital channel 1 If tuning a digital channel and your channel contains more than one program, press PROG and enter the program (1, 2, 3 etc.) using the NUMBER keys. Press OK. The following is an example of tuning to 2 channel 15-1. Channel, Program and Station identifier Ending time Program title 15-2 ABC - HD - 10:30 Andrew's cooking show CC SAP TV-G 1080I Standard 4 : 3 Clock 10:00 am 30 Closed Caption Rating Picture mode Sleep Timer Level remaining time SAP Signal resolution Aspect ratio For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo