Panasonic PTAE300U PTAE200U User Guide - Page 12
BASIC OPERATION, STARTING TO USE, Turning off the power
View all Panasonic PTAE300U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Starting to use Turning on the power Please ensure that all preparations have been completed before turning on the power. (Refer to pages 18 - 21.) # Remove the lens cover. $ Connect the accessory power cord. % Press the MAIN POWER switch to the "|" side to turn on the power. The power indicator on the projector will illuminate red. & Press the POWER button. The power indicator on the projector will flash green. After a short period, the button will illuminate green, and a picture will be projected. ' Press the INPUT select button to select the input signal. The input signal selected will change as shown at below-right each time an input select button (INPUT/VIDEO/ CMPNT/PC/SD) is pressed. INPUT SD CARD DVI PC YŋPBŋPR S-VIDEO VIDEO VIDEO S-VIDEO PC VIDEO CMPNT SD YŋPBŋPR ( While pressing the adjuster buttons, adjust the forward/back angle of tilt of the projector. If there is keystone distortion in the projected images, carry out keystone correction as described on page 28. 22-ENGLISH DVI PC POWER LIGHT INPUT VIDEO CMPNT PC COMPONENT KEYSTONE MENU ENTER NORMAL FREEZE MODE MEMORY ASPECT PICTURE USER MUTE VOLUME SD SD MENU TIME POWER LIGHT INPUT VIDEO CMPNT PC COMPONENT KEYSTONE MENU ENTER NORMAL FREEZE MODE MEMORY ASPECT PICTURE USER MUTE VOLUME SD SD MENU TIME SD CARD *"DVI" is only for PT-AE300U. ) Turn the focus/zoom ring to adjust the projected image focus and size. Zoom Focus Turning off the power # Press the POWER button. "POWER OFF" is displayed on the screen. $ Select "OK" using the I and H buttons and POWER OFF OK CANCEL press the ENTER button. The lamp unit will switch off and the picture will stop being projected. (The power indicator on the projector will illuminate orange.) % Wait until the power indicator on the projector illuminates red (until the cooling fan stops). Do not in any way cut power to the projector while the cooling fan is still operating. Be careful not to switch off the MAIN POWER switch of the projector, unplug the power cord from the electrical outlet or turn off in-line switches such as tabletop power switches. & Press the MAIN POWER switch to the "O" side to turn off the power. NOTE: B After the power is turned off, the lamp unit will take some time to cool down. If you turn the power back on again before the lamp unit has cooled down, the lamp unit may not turn on straight away, but it will turn on automatically after a short period. (During this time, the power indicator on the projector will flash orange.) B When the projector is in standby mode (the power indicator on the projector is illuminated red), the projector will still draw a maximum 1.5 W of power, even when the cooling fan has stopped. B If the MAIN POWER switch is accidentally turned off while the projector is being used, the lamp unit may not turn on straight away after the power is turned back on. In such cases, the lamp unit will turn back on automatically after a short period. (During this time, the power indicator on the projector will flash green.) B A tinkling sound may be heard while the power indicator is turned off, but this is not a sign of a malfunction. B You can also turn off the power by pressing the POWER button twice or by holding down it for at least 0.5 seconds. ENGLISH-23 Basic Operation