Panasonic PTAE300U PTAE200U User Guide - Page 9
USING THE REMOTE CONTROL UNIT, <Connector panel>, Operating range - pt ae300u
View all Panasonic PTAE300U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
#% & ' ( $ #$% ' ( # AUDIO L-R input jacks (page 18) $ VIDEO input jack (page 18) This jack is used to input video signals from a video equipment such as a video deck. % S2 VIDEO input connector (page 18 and 30) This connector is used to input signals from an S-VIDEOcompatible equipment such as a video deck. The connector is compatible with S2 and S1 signals, and projector aspect is automatically adjusted according to the type of signal received. & DVI-D IN connector (page 20) This connector is used to input DVI-D signals. ' RGB input connector (page 20) This connector is used to input RGB signals from a PC. ( YPBPR(CBCR) input jacks (page 19) These jacks are used to input YPBPR signals from compatible equipment such as DVD players. 16-ENGLISH Using the remote control unit Operating range # Open the cover. $ Insert the batteries so that the polarities are correct, and then close the cover. ʓ ʓʵ ʓʵ ʓ AAA batteries (two) NOTE: B Do not drop the remote control unit. B Keep the remote control unit away from liquids. B Remove the batteries if not using the remote control unit for long periods. B Do not use rechargeable batteries. Operating range If the remote control unit is held so that it is facing directly in front of the remote control signal receptors on the front of the projector, the operating range is within approximately 7 m (23´) from the surfaces of the receptors. Furthermore, the remote control unit can be operated from an angle of ±30° to the left or right and ±15° above or below the receptors. NOTE: B If there are any obstacles in between the remote control unit and the receivers, the remote control unit may not operate correctly. B If strong light is allowed to shine onto the remote control signal receiver, correct remote control operation may not be possible. Place the projector as far away from light sources as possible. B If facing the remote control unit toward the screen to operate the projector, the operating range of the remote control unit will be limited by the amount of light reflection loss caused by the characteristics of the screen used. ENGLISH-17 Preparation