Panasonic PTAE500U PTAE500U User Guide - Page 22

Option settings Press the F or G button to select an item, and then press the I or H button to change the setting. OPTION OSD ON NR ON PC PRIORITY NORMAL BACK COLOR BLACK EDID FRONT/REAR DESK/CEILING FAN CONTROL LAMP POWER LAMP RUNTIME SELECT ADJ EDID1 FRONT DESK NORMAL HIGH 5H ESC OSD OSD ON [ OFF ON The signal name is displayed in the top-right corner of the screen when the input signal is changed. OFF Use this setting when you do not want the signal name to be displayed. Noise Reduction (NR) (YPBPR only) NR ON [ OFF If noise occurs from the projector because of a poor input signal, set "NR" to "ON". To turn off the "NR" feature, set it to "OFF". PC PRIORITY (PC only) PC PRIORITY NORMAL [ WIDE NORMAL The PC screen data is displayed in a 4:3 aspect ratio. WIDE The PC screen data is displayed in a 16:9 aspect ratio. BACK COLOR BACK COLOR BLACK [ BLUE This sets the color which is projected onto the screen when no signal is being input to the projector. EDID (DVI only) EDID EDID1 [ EDID2 When DVI signals such as 525p, 625p, HDTV60, HDTV50, or 750p signals are being input, set to "EDID1". Set to "EDID2" when other signals are being input. NOTE: B "EDID" stands for "Extended Display Identification Data". It is used to transmit information such as the model name of this projector or the settings to the computer connected to DVI-D IN connector. This is useful for projecting the images with the proper resolution. 42-ENGLISH FRONT/REAR FRONT/REAR FRONT [ REAR This setting should be changed in accordance with the projector setting-up method. (Refer to page 16.) FRONT When the projector is placed in front of a screen. REAR When using a translucent screen. DESK/CEILING DESK/CEILING DESK [ CEILING This setting should be changed in accordance with the projector setting-up method. (Refer to page 16.) DESK When the projector is placed on a desk or similar. CEILING When the projector is suspended from a ceiling using the ceiling bracket (sold separately). FAN CONTROL FAN CONTROL NORMAL [ HIGH Set "FAN CONTROL" to "HIGH", when using this projector at high elevations (above 1 400 m) only. LAMP POWER LAMP POWER HIGH [ LOW This setting changes the lamp brightness. When set to "LOW", the luminance of the lamp is reduced, but the projector uses less power, and the operating noise is also reduced. The "LOW" setting is recommended for narrow rooms where a high picture luminance is not essential or for watching movies. NOTE: B "LAMP POWER" cannot be set when no signal is being input. LAMP RUNTIME This setting displays the usage time for the lamp unit which is currently being used. When replacing the lamp unit, follow the instructions on page 48, and reset "LAMP RUNTIME" to "0". NOTE: B The lamp's operating life varies depending on the usage conditions (such as the "LAMP POWER" setting and the number of times the power is turned on and off). ENGLISH-43 Adjustments and settings