Panasonic PTF300NTU PTF300NTU User Guide - Page 14
Remote control, ENGLISH - 14
UPC - 791871111680
View all Panasonic PTF300NTU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Preparation About Your Projector Remote control Attaching a hand strap You can attach a favorite strap on to the remote control. Power button While the MAIN POWER is on, switch between standby mode and projection mode. (page 21) Project a laser pointer. (page 28) Display the main menu. (page 32) Navigate through the menus with FGIH, and activate the menu item with the ENTER button. (page 32) Capture the projected image as a frozen picture. (page 27) Reset some of the settings to the factory default settings. (page 27) Assign the frequently use functions from the options for shortcut. (page 27) Control to change the scale by means of digital zoom. (page 26) Top view Remote control signal emitters (page 25) Laser pointer beam emitter (page 28) Remote control indicator Pressing any button except the LASER button, the remote control indicator will flash. Pressing the LASER button, it will lit. Automatically adjust the setting of SHIFT, DOT CLOCK, CLOCK PHASE and SIGNAL SEARCH for the projected image of COMPUTER/ DVI signal. (page 25) Switch the required input signal button to select. Return to the previous menu. (page 32) Turn off the projection temporarily. (page 27) Display the frozen image while the display of subsequent images continues. (page 27) Control to adjust the volume of the speaker. (page 29) (Shown as PT-F300NTU) These buttons are for network control. See the contents of the provided CD-ROM for instructions. The COMPUTER SEARCH button is for PT-F300NTU only. Battery compartment 1. Press the tab and lift up the cover. 2. Insert the batteries according to the polarity diagram indicated inside. NOTE: • Do not drop the remote control. • Avoid contact with liquids or moisture. • Use manganese batteries or alkaline batteries with the remote control. • Do not attempt to modify or disassemble the remote control. Contact an Authorized Service Center for repairs. • Do not keep pressing the remote control buttons as this may shorten battery life. • Do not point the laser in other people's eyes or stare into beam. • See "Remote control operation" on page 25. ENGLISH - 14