Panasonic PTF300U PTF300NTU User Guide - Page 14

Preparation

About Your Projector

E

NGLISH - 14

Remote control

NOTE:

•

Do not drop the remote control.

•

Avoid contact with liquids or moisture.

•

Use manganese batteries or alkaline batteries with the remote control.

•

Do not attempt to modify or disassemble the remote control. Contact an Authorized Service Center for repairs.

•

Do not keep pressing the remote control buttons as this may shorten battery life.

•

Do not point the laser in other people’s eyes or stare into beam.

•

See “Remote control operation” on page 25.

Power button

While the

MAIN POWER

is

on, switch between standby

mode and projection mode.

(page 21)

Project a laser pointer.

(page 28)

Display the main menu.

(page 32)

Navigate through the

menus with

FGIH

, and

activate the menu item

with the

ENTER

button.

(page 32)

Capture the projected image

as a frozen picture.

(page 27)

Reset some of the settings

to the factory default

settings. (page 27)

Assign the frequently use

functions from the options

for shortcut. (page 27)

Control to change the scale

by means of digital zoom.

(page 26)

Automatically adjust the

setting of

SHIFT

,

DOT

CLOCK

,

CLOCK PHASE

and

SIGNAL SEARCH

for

the projected image of

COMPUTER

/

DVI

signal. (page 25)

Switch the required input

signal button to select.

Return to the previous menu.

(page 32)

Turn off the projection

temporarily. (page 27)

Display the frozen image

while the display of

subsequent images

continues. (page 27)

Control to adjust the volume

of the speaker. (page 29)

These buttons are for network control. See the contents of the

provided CD-ROM for instructions. The

COMPUTER

SEARCH

button is for PT-F300NTU only.

Battery compartment

1.

Press the tab and lift up the cover.

2.

Insert the batteries according to the polarity diagram

indicated inside.

Attaching a hand strap

You can attach a favorite

strap on to the remote

control.

Top view

Remote control signal

emitters (page 25)

Laser pointer beam

emitter (page 28)

Remote control indicator

Pressing any button except the

LASER

button, the remote control indicator will

flash. Pressing the

LASER

button, it will

lit.

(Shown as PT-F300NTU)

Section	Page
Important Safety Notice	2
Contents	4
Precautions with regard to safety	6
WARNINGS	6
CAUTIONS	7
Cautions when transporting	8
Cautions when installing	8
Cautions on use	9
Security	9
Accessories	10
Read this first	11
Minimum required setting screen	11
About Your Projector	12
Projector body	12
Remote control	14
Setting up	15
Screen size and throw distance	15
Projection method	16
Front leg adjusters and throwing angle	16
Lens shift and positioning	17
Connections	19
Before connection to the projector	19
Connecting example: Computers	19
Connecting example: AV equipment	20
Switching the projector on/off	21
Power cord	21
Power indicator	22
Switching on the projector	23
Switching off the projector	23
Projecting an image	24
Selecting the input signal	24
Positioning the image	24
Remote control operation	25
Operating range	25
Setting up the image position automatically	25
Switching the input signal	26
Enlarging the centered area	26
Capturing an image	27
Stopping the projection	27
Resetting to the factory default settings	27
Projecting an image in INDEX-WINDOW mode	27
Using an assigned function	28
Using the laser pointer	28
Controlling the volume of the speaker	29
Menu Navigation	30
Main menu and Sub-menu	30
Navigating through the menu	32
PICTURE menu	33
PICTURE MODE	33
CONTRAST	33
BRIGHTNESS	33
COLOR	33
TINT	33
SHARPNESS	33
WHITE BALANCE RED	33
WHITE BALANCE GREEN	33
WHITE BALANCE BLUE	33
COLOR TEMPERATURE	34
DAYLIGHT VIEW	34
DIGITAL CINEMA REALITY	34
NOISE REDUCTION	34
TV-SYSTEM	34
RGB/YPBPR	34
POSITION menu	35
KEYSTONE	35
SHIFT	35
DOT CLOCK	35
CLOCK PHASE	35
OVER SCAN	35
ASPECT	36
FRAME LOCK	37
DISPLAY OPTION menu	38
ON-SCREEN DISPLAY	38
DVI-D IN	38
CLOSED CAPTION SETTING	38
STARTUP LOGO	39
AUTO SETUP	39
SIGNAL SEARCH	39
BACK COLOR	39
WIDE MODE	39
SXGA MODE	39
OTHER FUNCTIONS	40
PROJECTOR SETUP menu	41
STATUS	41
COMPUTER2 SELECT	41
NO SIGNAL SHUT-OFF	41
INITIAL START UP	41
INSTALLATION	42
HIGH ALTITUDE MODE	42
EMULATE	42
FUNCTION BUTTON	42
AUDIO SETTING	42
TEST PATTERN	43
INITIALIZE ALL	43
FILTER COUNTER RESET	43
SECURITY menu	44
PASSWORD	44
PASSWORD CHANGE	44
TEXT DISPLAY	44
TEXT CHANGE	44
MENU LOCK	45
MENU LOCK PASSWORD	45
CONTROL DEVICE SETUP	45
NETWORK menu	46
Items in NETWORK menu	46
TEMP, LAMP and FILTER Indicators	47
Managing the indicated problems	47
Care and Replacement	48
Cleaning the projector	48
Replacing the Lamp unit	48
Replacing the Auto Cleaning Filter (ACF)	49
Troubleshooting	51
Technical Information	52
List of compatible signals	52
Serial terminal	53
Computer connection guidance	54
REMOTE terminal	55
DVI-D IN terminal	56
Ceiling mount bracket safeguards	56
Screen size and throw distance for 16:9 aspect ratio	57
Specifications	58
Dimensions	60
Trademark acknowledgements	60
Index	61
A	61
B	61
C	61
D	61
E	61
F	61
H	61
I	61
K	61
L	61
M	61
N	62
O	62
P	62
R	62
S	62
T	62
V	62
W	62
Z	62
Avis important concernant la sécurité	63
Précautions de sécurité	65
AVERTISSEMENT	65
MISES EN GARDE	66
Précautions lors du transport	67
Précautions lors de l'installation	67
Précautions lors de l'utilisation	67
Sécurité	68
Remplacement de l'unité de la lampe	69

Panasonic PTF300U PTF300NTU User Guide - Page 14

Remote control, ENGLISH - 14 - pt f300ntu

Page 14 highlights