Panasonic PTF300U PTF300NTU User Guide - Page 34
Color Temperature, Daylight View, Digital Cinema Reality, Noise Reduction, Tv-system, Rgb/ypbpr
UPC - 791871111697
View all Panasonic PTF300U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
PICTURE menu COLOR TEMPERATURE TV-SYSTEM You can adjust the white balance of the projected image. LOW More bluish DEFAULT Balanced white HIGH More reddish When the video signal is changed, the setting switches automatically. You can switch the setting manually to match the video data. Press I H to cycle through the options. (Available with S-VIDEO/VIDEO only) DAYLIGHT VIEW You can keep the projected image bright and vivid even in well-lit rooms where the ambient light sources cannot be controlled, such as when a door opens or when window coverings fail to block out sunlight. AUTO: Automatic adjustment ON: Active OFF: Deactive NOTE: • Do not cover the Ambient Luminance Sensor (ALS) of the projector. See "Ambient Luminance Sensor (ALS)" on page 12. • AUTO is not available when INSTALLATION setting in OPTION menu is set to REAR/DESK or REAR/CEILING. DIGITAL CINEMA REALITY You can improve the vertical resolution of a 2-2 or 2-3 pulldown movie. Press I H to select the required setting. (Not available with NETWORK signals) OFF Deactive ON Active NOTE: • Available with 480i, 576i, 1 080/60i and 1 080/50i only. NOISE REDUCTION FG NTSC FG NTSC 4.43 FG PAL AUTO IH FG SECAM FG PAL-N FG PAL-M NOTE: • AUTO setting will select from NTSC/NTSC 4.43/PAL/ PAL60/PAL-M/PAL-N/SECAM. RGB/YPBPR The projector will detect the signal from the COMPUTER terminals if the signal is RGB or YPBPR. You can turn off the automatic detecting system and switch between RGB and YPBPR manually. AUTO: Automatic detecting system RGB: Project as RGB signal YPBPR: Project as YPBPR signal NOTE: • Available with VGA60, 480i, 576i, 480p, 576p, 1 080/60i, 1 080/50i, 720/60p, 720/50p, 1 080/60p, 1 080/50p only. • When the input signal is not selected correctly with AUTO setting, select RGB or YPBPR manually. You can switch the automatic noise reduction system on/ off. Press I H to select the required setting. ON: Automatic noise reduction OFF: No noise reduction NOTE: • Applying noise reduction may affect image quality. Settings ENGLISH - 34