Panasonic PV-D4745K PVD4745 User Guide - Page 10

Location of Controls (continued) Rear View of DECK Bold: VCR Function Italic: DVD Function Bold Italic: VCR and DVD Functions AC Power Plug • While plugged into an AC outlet, this DECK consumes 0.9 W of electrical power in off mode. VHF/UHF Antenna Output Terminal p.12 VHF/UHF Antenna Input Terminal p. 12 Component Video Output Connector (Y, PB, PR) (DVD Only) p. 13 Video Output Video Input Connector Connector p. 12 p. 35 • • • Optical Digital Audio Output Connector (DVD Only) p. 15 S-Video Out Connector (DVD Only) pp. 10, 13 Audio Input Connector (L/R) p. 35 Audio Output 2 Audio Output 1 Connector (L/R) Connector (L/R) p. 13 p. 12 The following table shows the status of the output jacks when in VCR or DVD mode. VCR Video Output Audio Out 1 Audio Out 2 YES Component Video Output N/A S-VIDEO OUT N/A DVD YES YES Note • PROG functions on the remote are not available when using Component Video Output and S-VIDEO OUT. Please set TV to either RF INPUT or VIDEO INPUT, and then press PROG. To enjoy PROGRESSIVE SCAN video (1). Connect Component Video Output to the component video input terminals of a television. (See p. 13.) (2). When PROGRESSIVE OUT is set to "ON" in the DVD Main Menu (p. 55), a Progressive Scan signal is output from the Component Video Output Connector. Notes • The screen may shift off-center when using progressive output. Please adjust the screen position if this occurs. (Refer to your TV manual.) • If the television is not progressive compatible, a progressive scan picture is not available. Connect the Video Output or S-Video Output connector (see p. 12, 13) and set PROGRESSIVE OUT to "OFF" in the DVD Main Menu. (See p. 55.) 10 For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo