Panasonic PV-D4745K PVD4745 User Guide - Page 55

*Important: If a remote control button does not work when pressed, press the DVD button on the remote and try the button again. DVD Operation PROGRESSIVE OUT Sets the Component Video Output Connector (p. 10, 13) to output the Progressive scan signal. 1 Press ACTION to display DVD MAIN MENU. 2 Press to select "PROGRESSIVE OUT," and press SET repeatedly for mode. (See below.) OFF: ON: Progressive scan signal is not output. Progressive scan signal is output from the Component Video Output Connector. 3 Press ACTION to exit this mode. A/V OPTIMIZER You can set to preset audio/video effects as desired. 1 Press A/V OPTIMIZER in Play mode to display the A/V OPTIMIZER selection on-screen. • Display disappears after 5 seconds. Notes • If the television is not progressive compatible, a progressive scan picture is not available. Connect the Video Output or S-Video Output connector (see p. 12, 13) and set PROGRESSIVE OUT to "OFF". • CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED TO SET PROGRESSIVE OUT TO "OFF". IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p DVD/VCR DECK, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. ACTION SELECT SET 2 Press A/V OPTIMIZER to select the desired mode below. NORMAL CINEMA ACTION DRAMA The video/audio effect of each mode is listed below. Mode NORMAL CINEMA DRAMA Video Standard video Bright areas are subdued. Standard video Audio Standard audio Enhances high/low range for dynamic sound. Reduces high/low range so dialog and vocals can be heard clearly. ACTION Brightness and sharpness are Enhances high/low range for enhanced. dynamic sound. A/V OPTIMIZER Note • With some discs, the audio/video effect may not be obtained, and the audio/video effects may not work well. 55