Panasonic PV-GS250 Digital Video Camera - Page 34
Tele-macro Function, Fade In/fade Out Function, Wind Noise Reduction Function
UPC - 037988980062
View all Panasonic PV-GS250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Record mode Tele-macro function By focusing only on the subject and blurring the background, the image can be impressive. This Camcorder can focus on the subject at a distance of approx. 16 inches (40 cm). ≥Set to Tape/Card Recording Mode. 1 Press the joystick until the icon 1 appears. 2 Move the joystick up to select the tele-macro icon [ ]. Start recording. (fade in) When you start recording, the image/audio disappears completely and the image/audio gradually appears. 1 ≥If the magnification is 10k or less, then it is automatically set to 10k. ª To cancel the tele-macro function Select the [ ] icon again. ≥If a sharper focus cannot be achieved, adjust the focus manually. ≥In the following cases, the tele-macro function is canceled. ≥The zoom magnification becomes lower than 10k. ≥The [OFF/ON] switch or the mode dial is operated. Fade in/fade out function Fade in The image and audio gradually appear. Fade out The image and audio gradually disappear. ≥Set to Tape Recording Mode. 1 Press the joystick until the icon 1 appears. 2 Move the joystick left to select the fade icon [ ]. Pause recording. (fade out) The image/audio gradually disappears. After the image/audio completely disappears, recording stops. ª To cancel fading Select the [ ] icon again. ª To select the color for fade in/out The color which appears in fading pictures can be selected. 1 Set [SETUP] >> [FADE COLOR] >> [WHITE] or [BLACK]. ≥While the fade in/fade out function is selected, it takes several seconds to display the image when you start recording images. Besides, it also takes several seconds to pause recording. Wind noise reduction function This reduces the wind noise coming into the microphone when recording. ≥Set to Tape Recording Mode. 1 Set [BASIC] >> [WIND CUT] >> [ON]. 1 B 3 Press the recording start/stop button. ª To cancel the wind noise reduction function Set [BASIC] >> [WIND CUT] >> [OFF]. ≥Reduces the wind noise depending on the wind strength. (If this function is activated in strong winds, the stereo effect may be reduced. When the wind weakens, the stereo effect will be restored.) 34 LSQT0862