Panasonic PV-GS250 Digital Video Camera - Page 50

Edit mode 5 Press the [;] button on the remote control to start audio dubbing. V/REW PLAY FF/W STILL ADV PAUSE STILL ADV W VOL STOP A.DUB ¥ ≥When the Magic Wire Remote Control with Narration Mic is used, start recording with the [TALK] button pressed. ≥Talk into the microphone. Or start play on the playing device. 6 Press the [;] button on the remote control to stop audio dubbing. V/REW PLAY FF/W STILL ADV PAUSE STILL ADV W VOL STOP ≥If a tape has a non-recorded portion when the tape is dubbed, images and sounds may be disturbed when this portion of the tape is played back. ª Before recording with audio dubbing ≥Set to Tape Recording Mode. ≥When you want to preserve the original sound taken during recording, set [SETUP] >> [AUDIO REC] >> [12bit] to take pictures. (When set [16bit], the sounds taken during recording are erased after recording with audio dubbing.) ≥Set [BASIC] >> [REC SPEED] >> [SP] to take pictures. ª To play back the sound recorded with audio dubbing You can switch between the sound recorded with audio dubbing and the original sound. Set [SETUP] >> [12bit AUDIO] >> [ST2] or [MIX]. [ST1]: It only plays back the original sound. [ST2]: It only plays back the sound added by audio dubbing. [MIX]: It simultaneously plays back the original sound and the sound added with audio dubbing. ª To dub audio while listening to a pre-recorded sound ≥When pausing the audio dubbing, set the [12bit AUDIO] on the [SETUP] Sub-Menu to [ST2] and you can check the pre-recorded sound. When the line input is used, you can dub audio while listening to the pre-recorded sound from the speaker. 50 LSQT0862