Panasonic PV GS400 Digital Video Camcorder - Page 19
USING A MEMORY CARD, TURNING ON THE CAMCORDER, Accidental Erasure Prevention
UPC - 037988977772
View all Panasonic PV GS400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Before Use 3 Close the Cassette Holder by pressing the [PUSH] mark 1. 1 PUSH 1 4 Close the Cassette Compartment Cover. ª Accidental Erasure Prevention Opening the accidental erasure prevention slider 1 on the cassette (by sliding it to the [SAVE] arrow direction) prevents recording. To enable recording, close the accidental erasure prevention slider (by sliding it to the [REC] arrow direction). 1 R E C SAVE ≥For other notes concerning this item, see -74-. Using a Memory Card A Card can be used to record pictures. ≥Use a genuine SD Memory Card or MultiMediaCard manufactured by Panasonic only. ª Caution before inserting/removing a Card Be sure to turn off the Camcorder. ≥Otherwise, the Camcorder may not function properly or it may cause the loss of recorded data in a Card. ª Inserting a Card 1 Slide the [OPEN] Lever (6) to open the Card Slot Cover (4). 3 Close the Card Slot Cover (4) securely. Removing the Card Open the Card Slot Cover and then pull the Card straight out. ≥After removing the Card, close the Card Slot Cover. ª [ACCESS] Lamp (11) (11) ACCESS While the Camcorder is accessing the Card (reading, recording, playback or erasing), the [ACCESS] Lamp lights up. ≥While the [ACCESS] Lamp is on, never attempt to open the Card Slot Cover, to pull out the Card, to turn off the Camcorder. Such actions will damage the Card, and recorded data, and cause the Camcorder to malfunction. ≥It may take time to record pictures if you use MultiMediaCard. (The [ACCESS] Lamp stays on longer. However, this is not a malfunction.) Turning on the Camcorder When the Camcorder is turned on with the Lens Cap on, the Automatic White Balance Adjustment may not function properly. Please turn on the Camcorder after removing the Lens Cap. ª How to Turn on the Power 1 Set the [OFF/ON] Switch (48) to [ON] while pressing the button 1. ≥The [POWER] Lamp (46) lights up. (46) POWER (6) OPEN (4) 2 While holding the Memory Card with its cut corner on top 1, insert it into the Card Slot. O O (48) ON FF 1 ª How to Turn off the Power 1 Set the [OFF/ON] Switch (48) to [OFF] while pressing the button 1. ON FF 1 (48) 19