Panasonic PV-L452 Vhs-c - Page 18

Camera Recording Before you begin... • Connect Camcorder to power source. • Insert cassette with record tab (page 11). Stand-by Quick Release If left in RECORD/PAUSE mode for 5 minutes, Camcorder switches to Stand-by mode to conserve battery. When set to ON, Stand-by Quick Release lets you resume recording by pressing RECORD/PAUSE two times. Stand-by Quick Release is set to OFF at the factory. b 1 Set POWER to CAMERA. a B c 2, 3, 4 2 Press MENU for MENU mode. Press UP or DOWN to select STAND-BY RELEASE . 3 Press DISPLAY to select ON/OFF. ON : From Stand-by mode, press RECORD/PAUSE two times to resume recording. a, d, D 1, b, c, A, C OFF : From Stand-by mode, set POWER to OFF, then to CAMERA. Press RECORD/ PAUSE to record. 4 Press MENU to exit. Manual Easy Editing For proper continuity when taping from Stop mode or after attaching a new Battery. A Set POWER to VCR. B a Press REWIND/SEARCH to rewind a few seconds of tape. b Press PLAY to review recording. c Press STILL where you want to continue recording. C Set POWER to CAMERA. D Press RECORD/PAUSE to resume recording. Easy Edit Stand-by For a smooth transition between scenes if recording is stopped, and then started within 24 hours. a Press RECORD/PAUSE to stop recording. b Set POWER to OFF and leave cassette in Camcorder. c To resume recording, set POWER to CAMERA. d Press RECORD/PAUSE to resume recording. Note: • Use Manual Easy Edit (left) if more than 24 hours before recording is resumed. 18 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]