Panasonic PV-V4603 PVV4603S User Guide - Page 9

• VHS Hi-Fi Stereo System • MTS Broadcast MTS Broadcast Connection Make the Audio/Video Connection as shown on page 3. • You can use a TV connected to Stereo amp and speakers instead of a Stereo TV. TV R L VHF/UHF VCR AUDIO OUT RR L OUT TO TV Stereo Amplifier R AUDIO IN L VHS Hi-Fi Stereo System Audio Mode for Recording 1 Press SAP/ Hi-Fi to display audio mode. (Display disappears after 5 seconds.) 2 STEREO SAP MONO Press SAP/ Hi-Fi repeatedly to select desired mode. • Refer to "Receivable Broadcast Types" on page 4. • Arrow indicates selection. 3 Make a recording. See p. 5 of "Basic Operations" Instruction book. Receivable Broadcast Types The following are possible audio broadcast types and on-screen displays. The signal being received is indicated with an " " mark while the selected audio mode is indicated with an arrow. To display the broadcast signal being received, ➛ press DISPLAY*. MTS Stereo and SAP broadcast Multi-channel Television Sound Stereo (main language) and Secondary Audio Program (sub language) broadcasts are being received simultaneously. Select STEREO or SAP audio mode. STOP 12 : 0 0AM CH 02 0 : 00 : 00 STEREO SP SAP MONO Audio Mode for Playback 1 Start playback. See p. 5 of "Basic Operations" Instruction book. 2 Press SAP/ Hi-Fi to display audio mode. (Display disappears after 5 seconds.) 3 HIFI : L/R HIFI : L HIFI : R NORMAL • Arrow indicates selection. Press SAP/ Hi-Fi repeatedly to select desired mode. • Select "HIFI(L/R)" or "HIFI(L)" or "HIFI(R)" to listen to stereo recordings in stereo sound. Select "NORMAL" for monaural sound. MTS Stereo broadcast Multi-channel Television Sound Stereo broadcast. Select STEREO audio mode. • If stereo broadcast is weak and display flickers, select MONO audio mode for possible better results. STOP 12 : 0 0AM CH 02 0 : 00 : 00 STEREO SP SAP MONO SAP broadcast Secondary Audio Program (sub language) broadcast. Select SAP audio mode for the sub language. STOP 12 : 0 0AM CH 02 0 : 00 : 00 STEREO SP SAP MONO Notes • Only tapes recorded in Hi-Fi stereo will playback with true stereo sound. Standard stereo tapes will playback in monaural sound. • To listen to Hi-Fi stereo playback, the VCR AUDIO (L/R) jacks must be connected to a stereo TV or an external stereo amp and speakers. (See page 4.) • If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio. • Hi-Fi and normal audio playback volume level may differ. MONO broadcast Normal monaural sound broadcast. STOP 12 : 0 0AM CH 02 0 : 00 : 00 STEREO SP SAP MONO Equipped with ® -TV Noise Reduction for true MTS reproduction. ® -TV Noise Reduction is required for good stereo separation and audio fidelity. ® is a registered trademark, and is licensed by ® Technology Licensing. - 4 - *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. - 5 -