Panasonic PVC2033W PVC2023 User Guide - Page 32

On-Screen Display (OSD) VCR Status & Clock Display Press DISPLAY to display or remove the overlay. Channel Function Status Current Time Counter Rec Time Remaining (OTR mode only, see page 12.) REC 0 : 25 1 2 : 0 0PM CH08 -0 : 1 2 : 3 4 SP NO V-CHIP DATA Blue Screen Display Whenever a blank section of a tape comes up in Play mode, or when the selected channel has no broadcast signal with the Weak Signal Display set to "OFF" (see page 28), the screen will turn solid blue. Channel & Function Display When a function button is pressed (PLAY, FF, etc.) or you change channels, the unit mode or channel number will be displayed. CH 08 Tape Speed Warning and Instruction Displays These displays will alert you to a missed operation or provide further instructions. OSD CAUTION Page PLEASE SET CLOCK BY PRESSING ACTION KEY If you attempt to set or review a Timer Recording, or set the On-Timer and the Clock is not set... 8 - 11 CHECK CASSETTE RECORD TAB If you press REC, and a cassette is inserted with no record tab... 3, 12 TO CANCEL TIMER REC HOLD DOWN STOP KEY FOR APPROX 3 If you press STOP during a Timer Recording... 23 SEC NO CASSETTE If you press PLAY, FF, REW, or REC without a cassette inserted... 12 PLEASE PREPARE FOR TIMER REC If the unit is not in Stop mode or a cassette with record tab is not inserted two minutes before a Timer Recording is about to begin... VIDEO HEADS MAY NEED CLEANING PLEASE INSERT HEAD CLEANING CASSETTE OR REFER TO MANUAL END: PLAY If head cleaning becomes necessary while playing back a tape... 22 - 23 4 VCR LOCK ACTIVATED If you press a function button other than STOP/EJECT or POWER while the unit is in VCR Lock mode... 28 32 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]