Panasonic PVVM202 PVVM202 User Guide - Page 62

ª Index Search Functions (l 30) ≥Index Search may not be possible at the beginning of tape. ≥Because PhotoShot Index Signals are not recorded on still pictures recorded in Continuous PhotoShot Mode, the PhotoShot Index Function cannot be used for these still pictures. ≥Scene Index Search may not function properly if the interval between 2 scene index signals is shorter than 1 minute. ª Playback Zoom Functions (l 31) ≥You cannot adjust volume with the Remote Controller in Playback Zoom Mode. ≥If you turn off the Palmcorder, or if you switch from VCR Mode to Camera Mode, Playback Zoom Mode is automatically cancelled. ≥Even if Playback Zoom Functions are being used, images that are output from the DV Terminal or Digital Still Picture Terminal are not enlarged. ≥As you enlarge an image, the quality of image suffers. ≥If you select Multi-Picture Mode in the Playback Zoom Mode, equivalent magnification (1k) becomes zoom magnification. ≥During the Playback Zoom Function, the Variable Speed Search Function cannot be used with the Remote Controller. ª Playback Digital Effect Functions (l 31) ≥Revised signals of images to which digital effects are added during playback cannot be output from the DV Terminal or Digital Still Picture Terminal. ≥You cannot use the Wipe Function or Mix Function while playing back the non-recorded portion of tape. ≥You cannot use the Mirror Mode of Digital Effects and the Playback Zoom Function simultaneously. ª Multi-Picture Mode (VCR Mode) (l 32) ≥The quality of Multi images deteriorates slightly. ≥Playback multi-mode screens cannot be output through DV Terminal or Digital Still Picture Terminal. ≥If there is input from the DV Terminal, a multi screen cannot be created. ≥When signals are input from Video Input/Output Jack or Audio-Video Input/Output Jack, a multi screen cannot be re-displayed. ≥Signals input from Video Input/Output Jack or Audio-Video Input/Output Jack cannot be displayed on a Multi screen. ≥If you switch the Palmcorder from the Index Multi-Picture Mode over to the Camera Mode, the setting of [SCAN MODE] on the [MULTI-PICTURES] Sub-Menu of the [CAMERA FUNCTIONS] Main-Menu is automatically set to [STROBE]. ª Listening to Playback Sound Through Headphones (l 28) If you want to listen to the playback sound of a tape through headphones, set [AV JACK] on the [AV IN/OUT SETUP] Sub-Menu to [OUT/PHONES] and connect the headphones to the [PHONES] Jack on this Palmcorder. In this case, no sound (including warning sounds and shutter sounds) will be reproduced through the built-in speaker of the Palmcorder. When the A/V Cable is inserted into the AV Jack, the internal speaker works. ª Selecting the Sound during Playback (l 28, 33) You can select the sound by using the [AUDIO OUT] on the [PLAYBACK FUNCTIONS] Sub-Menu. STEREO: Stereo Sound (main sound and subsound) L: Left channel sound (main sound) R: Right channel sound (sub sound) ≥If you dub a tape recorded at the [12bit] selected as the [AUDIO-REC] on the [RECORDING SETUP] Sub-Menu, playback sound becomes stereo sound regardless of the [AUDIO OUT] setting if [AUDIO] is set to [MIX]. ª Audio Dubbing (l 33) ≥The blank section of a tape cannot be dubbed. ≥Sounds sent through the DV Terminal cannot be dubbed. ≥If a tape has a non-recorded portion when the tape is dubbed, images and sounds may be disturbed when this portion of the tape is played back. ≥If you set the tape counter back to 0 at the position where you want to stop Audio Dubbing so as to make it possible to use the Memory Stop function (l 68), Audio Dubbing is terminated automatically when the tape reaches this position. ≥In the case of importing data recorded with Audio Dubbing to a Computer using the Computer's software program, only the original sound (ST1) may be imported, depending on the software program. ª About the Battery Adaptor Unit (l 34) ≥To protect the internal electric circuit and the data on the Memory Card, attaching/removing the Battery Adaptor Unit is invalid when Palmcorder Off/On Switch is set to on. ≥It is possible to use the Battery Adaptor Unit when operation Card PhotoShot only. ≥When attaching the Battery Adaptor Unit, the Microphone on the Palmcorder becomes unavailable and the Microphone on the Battery Adaptor Unit operates. (The Microphone becomes monaural.) ≥When removing, be carefull not to drop the Camera Unit and the Video Unit by holding them carefully. ≥Do not attach the Battery while the Battery Adaptor Unit or the Video Unit is removed from the Camera Unit. ≥The Remote Controller cannot be used when the Battery Adaptor Unit is used. ≥Wind Cut Function cannot be used when the Battery Adaptor Unit is used. ª Card Functions (l 35- 44) ≥Do not touch the connector terminal located on the back of the card. ≥If the Card Slot Cover is open, the card cannot be accessed. ≥Wide images cannot be recorded on the Memory Card. ≥A card that was formatted with this Palmcorder may not be usable in other equipment. If this happens, please format the card with the equipment with which the card is to be used. Before proceeding with this operation, we suggest that you take the precautionary measure of storing important images in your personal computer. ≥In the Card PhotoShot mode, the Palmcorder automatically saves the file numbers (100-0012, etc.) along with the pictures. A file number is recorded with each picture as a running number. 62