Panasonic RP-BT10-K RPBT10 User Guide - Page 18

Talking on your cellphone Registering the device pair In order to establish the wireless connection between the receiver and Bluetooth cellphone, the receiver and cellphone pair must be registered. • Operations involving the receiver Press and hold the MIC button on the receiver for 2 seconds. The receiver's power is turned on, and its lamp (red) starts blinking slowly. Press and hold the [-] button on the receiver for 6 seconds. The lamp (red) starts blinking rapidly. Caution: While the lamp (red) blinks rapidly (for about 60 seconds), register the pairing of the receiver and Bluetooth cellphone. Repeat step if the lamp (red) starts blinking slowly. 18 RQT8993 • Operations involving the Bluetooth cellphone Using your cellphone, conduct a Bluetooth device search. Caution: • A list of detected devices is displayed on the cellphone screen, and "RP-BT10R Panasonic" is displayed for the receiver. If "RP-BT10R Panasonic" is not displayed, repeat the procedure from step . • If you are requested to input the pass key, input "0000." Notes: • For further details on conducting the Bluetooth device search, refer to the operating instructions of your cellphone. • Once the pairing has been registered, it need not be registered again. • It may not be possible to register the pairing with some cellphones because they use a different data transfer format.