Panasonic RP-BTD10 Owners Manual - Page 3
Charging, Connecting a Bluetooth, device, Turning the power on/off
View all Panasonic RP-BTD10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Charging The rechargeable battery (installed in the unit) is not charged initially. Charge the battery before using the unit. 1 Connect this unit to a computer using the USB charging cord • During charging, the LED on the left speaker will light in red. When charging is completed, the LED will go out. • Charging will take approximately 4.5 hours from empty state to fully charged. Computer Left LED USB charging cord (supplied) ■ Note • The Bluetooth® feature cannot be used when this unit is connected to a computer using the USB charging cord. • Recharge in a room temperature between 10 °C and 35 °C (50 ºF and 95 ºF). • The power cannot be turned on while charging. • Do not use any other USB charging cords except the supplied one. Caution: Use only the supplied USB charging cord when connecting to a computer. Turning the power on/off 1 Press and hold the power button for approximately 2 seconds • A beep will sound and the LED on the left speaker will blink. Power button To turn the power off • Press and hold the power button for 2 seconds or more. A beep will sound and the power will be turned off. ■ Note • When the unit is not operated for approximately 5 minutes, the power will automatically turn off. (See "Auto power off" (→ P. 5)) Connecting a Bluetooth® device To establish a wireless connection, register the unit with Bluetooth® compatible devices. Preparation on the Bluetooth® device • Turn on the power, and enable the Bluetooth® feature. • Place the device within 1 m (3.3 feet) from the unit. • Check the device operation in its operation instructions, as required. Power on for the first time 1 Turn on the unit • The unit will start searching for the Bluetooth® device to connect to, and the LED on the left speaker will blink in blue and red alternately. (Only one operation after purchase) 2 When the unit ("RP-BTD10") is detected by the Bluetooth® device, select it • If prompted for a passkey, input "0000 (four zeros)". • If the Bluetooth® profile selection screen appears, select the "A2DP" profile. If "A2DP" is not supported or if you want to just use phone calls, select the "HSP" or "HFP" profile. (For details on profiles, see "Listening to music" (→ P. 4) and "Making a phone call" (→ P. 5)) 3 Check the connection with the Bluetooth® device on the unit • First the LED on the left speaker lights in blue and repeats on and off. When the connection is established, blinking pattern will change. Connection after the second time When the unit is turned on, it will search for the previously setup Bluetooth® device and automatically start connecting to it. First the LED on the left speaker lights in blue and repeats on and off. When the connection is established, blinking pattern will change. Disable the Bluetooth® feature on the previously connected device. Check that the unit is turned off. Press and hold the pairing button for approximately 5 seconds. The unit will start searching for other Bluetooth® device. The LED on the left speaker will blink in blue and red alternately. A beep will sound. Continue steps 2 and 3. ■ Note • If connection to a device is not established within approximately 5 minutes, the unit will be turned off. Start from step 1 again. • 2 or more Bluetooth® devices cannot be connected to the unit at the same time. • You can pair up to 8 devices with 3 this unit. If a 9th device is paired, the device with the oldest connection will be replaced. To use it, pair it again. 3 VQT5J78 ENGLISH