Panasonic RP-BTD10 Owners Manual - Page 6

Restoring to the factory settings When you want to delete all pairing device information, etc., you can restore the unit to the factory settings (original settings upon purchase). 1 Turn off the unit 2 Press and hold the power button and Previous for 5 seconds or more simultaneously • The LED on the left speaker will light in red for approximately 2 seconds. The unit will restore to the factory settings. Maintenance Clean this unit with a dry and soft cloth. • Do not use solvents including benzine, thinner, alcohol, kitchen detergent, a chemical wiper, etc. This might cause the exterior case to be deformed or the coating to come off. About Bluetooth® Panasonic bears no responsibility for data and/or information that is compromised during a wireless transmission. ■ Frequency band used This unit uses the 2.4 GHz frequency band. ■ Certification of this unit • This unit conforms to frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary. • The actions below are punishable by law in some countries: - Taking apart/modifying the unit. - Removing specification indications. ■ Restrictions of use • Wireless transmission and/or usage with all Bluetooth® equipped devices is not guaranteed. • All devices must conform to standards set by Bluetooth SIG, Inc. • Depending on the specifications and settings of a device, it can fail to connect or some operations can be different. • This system supports Bluetooth® security features. But depending on the operating environment and/or settings, this security may not be sufficient. Transmit data wirelessly to this system with caution. • This system cannot transmit data to a Bluetooth® device. ■ Range of use Use this unit at a maximum range of 10 m (33 feet). The range can decrease depending on the environment, obstacles or interference. ■ Interference from other devices • This unit may not function properly and troubles such as noise and sound jumps may arise due to radio wave interference if this unit is located too close to other Bluetooth® devices or the devices that use the 2.4 GHz band. • This unit may not function properly if radio waves from a nearby broadcasting station, etc. is too strong. ■ Intended usage • This unit is for normal, general use only. • Do not use this system near an equipment or in an environment that is sensitive to radio frequency interference (example: airports, hospitals, laboratories, etc.). VQT5J78 6 6