Panasonic SA-XR50S SAXR50 User Guide - Page 21

Advanced setup You can adjust the settings to match the setup environment and performance of the connected speakers. ^ POWER 8 SPEAKERS A B 6.1CH DECODING VCR 2 VIDEO IN L AUDIO IN R MULTI CONTROL INPUT SELECTOR PUSH ENTER VOLUME DOWN UP PHONES MULTI CONTROL INPUT SELECTOR PUSH ENTER Multi control advanced setup settings MULTI CONTROL 1 Enter Multi control mode MULTI CONTROL PUSH ENTER Main menu is displayed. (Multi control mode menus and factory settings á back cover) 2 Select "SETUP 2 (ADVANCE SETUP)". INPUT SELECTOR INPUT SELECTOR SPEAKERS Set the size to suit your speakers. LARGE: For speakers that can reproduce a full sound range, particularly the bass range below 100 Hz. SMALL: For speakers that cannot adequately 1. Select. reproduce the bass range. This setting is sufficient for most speakers if you are using a subwoofer. INPUT SELECTOR INPUT SELECTOR NONE: For speakers you haven't connected (center or surround). S P E A K E R S For the surround back (SUR BACK) and subwoofer (SUB-WFR), select YES if you have connected one, or NO if you have not. 2. Select the speaker. INPUT SELECTOR INPUT SELECTOR FRONT FRONT, CENTER, SURROUND, SUR BACK, SUB-WFR 3. Change the setting. INPUT SELECTOR INPUT SELECTOR SMALL NONE, SMALL, LARGE NO, YES Switching Entering SETUP 2 3 Change the settings. • To cancel MULTI CONTROL PUSH ENTER To finish settings 1. Press [MULTI CONTROL] several times to select "EXIT". 2. Press [INPUT SELECTOR]. DISTANCE Enter the distance of the front, center and surround position. speakers from the seating 1. Select. Change the distance so that the sound from all the speakers (except for the subwoofer) INPUTSELECTOR INPUT SELECTOR reaches you at the same time. You can select distances between 3 and 30 feet at one-foot intervals. DISTANCE 2. Select the speaker. INPUT SELECTOR INPUT SELECTOR FRONT FRONT, CENTER, SURROUND, SUR BACK 3. Change the setting. INPUT SELECTOR INPUT SELECTOR 10 FEET 3 FEET 30 FEET FILTER 1. Select. Change the cut-off for bass output from the front speakers. If you set the front speakers to "SMALL", the filter is set to 100 Hz. Raise the cut-off if the bass from the front speakers is unsatisfactory so that this bass is output through the subwoofer. You can raise the cut-off from 100 Hz to either 150 Hz or 200 Hz. INPUT SELECTOR INPUT SELECTOR FILTER 2. Change the setting. INPUT SELECTOR INPUT SELECTOR 100 100, 150, 200 Operations RQT7487 21