Panasonic SAAK20 SAAK20 User Guide - Page 57

Playing discs The display is wrong or play won't start. "TAKE OUT/DISC" appears on the display. The picture does not appear on the TV, when playing DVD or Video CD. CD MANAGER, program and random play cannot be used. The SETUP menu cannot be accessed. You have forgotten your ratings password. The disc may be upside down. % Wipe the disc. Replace the disc if it is scratched, warped, or nonstandard. Condensation may have formed inside the unit due to a sudden change in temperature. Wait about an hour for it to clear and try again. There is a problem with the disc mechanism. (A power failure may have occurred.) The tray will open automatically. Remove the disc from the tray, and after ensuring there is no disc in the tray close it. The unit will make the disc changing noises for a few moments and then it should operate normally. The region number of the disc doesn't match the region number of this unit. (DVD only) front cover Connect the video cable. 8 Set the TV to video input mode. Ensure a Video CD or CD is in the play position tray. ., /, : Select disc as the source. Cancel program and random play, or select "NORMAL" with CD MANAGER. ., /, : Reset the unit to its original factory settings by doing the following. 1 Press [L,TUNE MODE] on the main unit and [≥10] on the remote control at the same time for about 3 seconds until the message "Initialized" disappears from the television screen. 2 Turn the unit off and on again. The remote control The remote control doesn't work. Check the batteries are inserted correctly. 5 Replace the batteries if they are worn. References Maintenance If the surfaces are dirty To clean this unit, wipe with a soft, dry cloth. • Never use alcohol, paint thinner or benzine to clean this unit. • Before using chemically treated cloth, read the instructions that came with the cloth carefully. For a cleaner crisper sound Clean the heads regularly to assure good quality playback and recording. Use a cleaning tape (not included). Product Service 1. Damage requiring service-The unit should be serviced by qualified service personnel if: (a) The AC power supply cord or AC adaptor has been damaged; or (b) Objects or liquids have gotten into the unit; or (c) The unit has been exposed to rain; or (d) The unit does not operate normally or exhibits a marked change in performance; or (e) The unit has been dropped or the cabinet damaged. 2. Servicing-Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel. 3. Replacement parts-When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards. 4. Safety check-After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition. Product information For product information or assistance with product operation: In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail [email protected], or web site (http://www.panasonic.com). In Canada, contact Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, web site (www.panasonic.ca), or an authorized Servicentre closest to you. 57 RQT6345