Panasonic SABT228 SABT228 User Guide - Page 31

VIERA Link Set to use "HDAVI Control" function when connected with an HDMI cable to a device that supports "HDAVI Control". ≥ Select "Off" when you do not want to use "HDAVI Control". Deep Color Output This setting is for selecting whether to use Deep Color output when a television that supports Deep Color is connected. Contents Type Flag Depending on the playback content, the TV will output adjusting to the optimal method when a TV that supports this function is connected. Power Off Link Select the desired power off link setting of this unit for VIERA Link operation (> 25). (This works depending on the settings of the connected VIERA Link "HDAVI Control" compatible equipment.) Video/Audio: When the TV is turned off, this unit will turn off automatically. Video: When the TV is turned off, this unit will turn off except during the following conditions: jCD or MP3 audio playback jiPod mode jRadio mode j"AUX", "ARC" or "D-IN 1" (DIGITAL IN 1) mode (non-selected TV AUDIO setting for VIERA Link) j"D-IN 2" (DIGITAL IN 2) mode (non-selected CABLE/ SAT AUDIO setting for VIERA Link) TV Audio Input Select the TV audio input to work with the VIERA Link operations. Speaker settings Delay time For optimum listening with 5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position. If either distance A or B is less than C (> below), find the difference in the relevant table and adjust the delay time to make up for the difference. A L LS LS C C R AC SW B RS RS : B : C D A B C: Primary listening distance A Approximate room dimensions B Actual speaker position C Ideal speaker position D Circle of constant primary listening distance 1 Press [3, 4, 2, 1] to select the distance box ( ms 0.0 ) and press [OK]. ms dB  L 0.0 C 0R Complete Test dB 0 SW  dB ms dB 0 0.0 0 LS RS Advanced operations Others Remote Control Code Change the remote control code, when other Panasonic products react to this remote control. Quick Start* Speed of startup from power off is increased. ≥ Internal control unit will be powered when it is set to "On", so contents of the following will be different from the time it is set to "Off". - Idle power consumption will increase. (about the power consumption > 40) *The cooling fan may turn slowly to prevent overheating of internal parts. * Depending on the power conserving setting activated on the TV, this function may have less effect when the unit is started by the power on link function. (> 25) Easy setup (> 15) You can execute basic settings to optimize your home theater system. Restore Default Settings This returns all values in the Setup menu and the playback menu, except for "Remote Control Code", "On-screen Language", "DVD-Video Ratings" and "BD-Video Ratings" to the default settings. A Center (C) B Left Surround (LS), Right Surround (RS) 2 Press [3, 4] to select the setting and press [OK]. A Center speaker Difference Setting Approx. 34 cm (1 ft. 1 in.) 1.0 ms Approx. 68 cm (2 ft. 2 in.) 2.0 ms Approx. 102 cm (3 ft. 4 in.) 3.0 ms Approx. 136 cm (4 ft. 5 in.) 4.0 ms Approx. 170 cm (5 ft. 6 in.) 5.0 ms B Surround speakers Difference Approx. 170 cm (5 ft. 6 in.) Approx. 340 cm (11 ft. 1 in.) Approx. 510 cm (16 ft. 8 in.) Setting 5.0 ms 10.0 ms 15.0 ms System Information Display firmware version of this unit. VQT2T10 31