Panasonic SAHT830V SAHT830V User Guide - Page 46

Picture incorrect, Progressive video, Sound incorrect, Listening to the radio, Recording

Page 46 highlights

Troubleshooting guide Picture incorrect Picture distorted. ≥Ensure that the unit is connected directly to the television, and is not connected through an A/ 7 V selector or other equipment. The television may display incorrectly or colors appear faded. ≥The unit and television are using different video systems. Use a multi-system or NTSC - television. ≥The system used on the disc doesn't match your television. PAL discs cannot be played. This - unit converts DVD-Audio recorded in PAL to NTSC for play, however, play may not function properly. The picture on the television ≥Mobile telephone chargers can cause some disturbance. - disappears or stripes appear on ≥If you are using a TV indoor antenna, change to an outdoor antenna. - the screen. ≥The television antenna wire is too close to the unit. Separate the antenna wire of the - television from the unit. Disc picture incorrect Picture size doesn't fit the screen. ≥Change "TV Aspect" in "Video" tab. 26 ≥Change the Zoom setting. 19 Menus not displayed correctly. ≥Restore the zoom ratio to a1.00. 19 ≥Set "Subtitle Position" in Display Menu to "0". 25 Auto zoom function does not work well. ≥Turn off TV's zoom function. - ≥Use the other preset aspect ratios or manual adjustment. 19 ≥Zoom function may not work well, especially in dark scenes and may not work depending on - the type of disc. VHS picture incorrect The picture is noisy or is in black ≥Adjust the tracking. 29 and white. ≥Make sure the television's input setting is correct. - Horizontal bars or lines run down ≥The video heads are dirty: clean them with a head-cleaning cassette. 47 the screen. ≥The video heads are worn: consult your dealer. - ≥The tape is old or damaged. - ≥You cannot correctly play tapes recorded with other systems (e.g., PAL). - Picture is distorted when stilled ≥Some distortion is normal with tapes recorded using VP mode. - or during slow-motion. The blue back appears during play. ≥You are playing a blank or poor quality part of the tape. - ≥You can damage the unit if you play dirty or damaged tapes and this can cause the blue back - to appear. Consult your dealer. The picture jiggles. ≥Adjust the vertical hold. 29 Progressive video There is ghosting when progressive output is on. ≥This problem is caused by the editing method or material used on DVD-Video, but should be 25 corrected if you use interlace output. Change "Video Output Mode" in Picture Menu to "480i". Pictures not in progressive output. Closed captions not displayed. Sound incorrect ≥If the unit is connected to the television through VIDEO OUT or S-VIDEO OUT output will be interlace. ≥Press [SHIFT]i[PROGRESSIVE]. Or select "480p" in "Video Output Mode" in Picture Menu. ≥When progressive output is on, closed captions will not be displayed. - 17, 25 - Sound distorted. Effects do not work. Humming heard during play. ≥Noise may occur when playing WMA files. - ≥Some audio effects do not work or have less effect with some discs. - ≥Multi Re-master and Dolby Pro Logic II do not work if you have changed the play speed. - ≥When connected with headphones, only Sound Field Control is effective. - ≥An AC power supply cord or fluorescent light is near the subwoofer. Keep other appliances - and cords away from the subwoofer. There is noise when playing a ≥Adjust the tracking. 29 video tape. ≥The tape is old or damaged. - Listening to the radio Noise is heard. ≥Adjust the position of the FM or AM antenna. - "ST" flickers or doesn't light. ≥Use an outdoor antenna. 10 Sound is distorted. A beat sound is heard. ≥Turn the television off or separate it from the unit. - A low hum is heard during AM ≥Separate the antenna from other cables. - broadcasts. Recording " " flashes when I try to start ≥If the erasure prevention tab has been removed, cover the hole with adhesive tape. 3 recording. Cannot record. Timer recording doesn't record a ≥Check the clock and calendar. - program correctly. ≥Set the channel and start and end times correctly. - ≥Be sure to press [ ] after programming to put the unit in timer recording standby. 32 ≥Program times may be overlapped. - Cannot record from other equipment. Black bands appear in the recording. ≥Press [W CH] or [X CH] to select "AV". 31 ≥Check the connections to the other equipment. 31 ≥Move the other equipment away from the television as it may be picking up interference. - RQT7921 The copy of a videotape or DVD is very poor. ≥This unit complies with industry standards regarding the recording and duplication of copyprotected material. This includes commercial videotapes and DVDs. Consequently, copying - 46 not only infringes copyright laws but also presents serious technical difficulties. Even in cases where a copy can be made, the quality will be very poor.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

46
RQT7921
Troubleshooting guide
Picture incorrect
Disc picture incorrect
VHS picture incorrect
Progressive video
Sound incorrect
Listening to the radio
Recording
Picture distorted.
Ensure that the unit is connected directly to the television, and is not connected through an A/
V selector or other equipment.
7
The television may display
incorrectly or colors appear
faded.
The unit and television are using different video systems. Use a multi-system or NTSC
television.
The system used on the disc doesn’t match your television. PAL discs cannot be played. This
unit converts DVD-Audio recorded in PAL to NTSC for play, however, play may not function
properly.
The picture on the television
disappears or stripes appear on
the screen.
Mobile telephone chargers can cause some disturbance.
If you are using a TV indoor antenna, change to an outdoor antenna.
The television antenna wire is too close to the unit. Separate the antenna wire of the
television from the unit.
Picture size doesn’t fit the screen.
Change “TV Aspect” in “Video” tab.
Change the Zoom setting.
26
19
Menus not displayed correctly.
Restore the zoom ratio to
a
1.00.
Set “Subtitle Position” in Display Menu to “0”.
19
25
Auto zoom function does not
work well.
Turn off TV’s zoom function.
Use the other preset aspect ratios or manual adjustment.
Zoom function may not work well, especially in dark scenes and may not work depending on
the type of disc.
19
The picture is noisy or is in black
and white.
Horizontal bars or lines run down
the screen.
Adjust the tracking.
Make sure the television’s input setting is correct.
The video heads are dirty: clean them with a head-cleaning cassette.
The video heads are worn: consult your dealer.
The tape is old or damaged.
You cannot correctly play tapes recorded with other systems (e.g., PAL).
29
47
Picture is distorted when stilled
or during slow-motion.
Some distortion is normal with tapes recorded using VP mode.
The blue back appears during
play.
You are playing a blank or poor quality part of the tape.
You can damage the unit if you play dirty or damaged tapes and this can cause the blue back
to appear. Consult your dealer.
The picture jiggles.
Adjust the vertical hold.
29
There is ghosting when
progressive output is on.
This problem is caused by the editing method or material used on DVD-Video, but should be
corrected if you use interlace output. Change “
Video Output Mode
” in Picture Menu to “480i”.
25
Pictures not in progressive
output.
If the unit is connected to the television through VIDEO OUT or S-VIDEO OUT output will be
interlace.
Press [SHIFT]
i
[PROGRESSIVE]. Or select “480p” in “Video Output Mode” in Picture Menu.
17, 25
Closed captions not displayed.
When progressive output is on, closed captions will not be displayed.
Sound distorted.
Noise may occur when playing WMA files.
Effects do not work.
Some audio effects do not work or have less effect with some discs.
Multi Re-master and Dolby Pro Logic
II
do not work if you have changed the play speed.
When connected with headphones, only Sound Field Control is effective.
Humming heard during play.
An AC power supply cord or fluorescent light is near the subwoofer. Keep other appliances
and cords away from the subwoofer.
There is noise when playing a
video tape.
Adjust the tracking.
The tape is old or damaged.
29
Noise is heard.
“ST” flickers or doesn’t light.
Sound is distorted.
Adjust the position of the FM or AM antenna.
Use an outdoor antenna.
10
A beat sound is heard.
Turn the television off or separate it from the unit.
A low hum is heard during AM
broadcasts.
Separate the antenna from other cables.
” flashes when I try to start
recording.
Cannot record.
If the erasure prevention tab has been removed, cover the hole with adhesive tape.
3
Timer recording doesn’t record a
program correctly.
Check the clock and calendar.
Set the channel and start and end times correctly.
Be sure to press [
] after programming to put the unit in timer recording standby.
Program times may be overlapped.
32
Cannot record from other
equipment.
Press [
W
CH] or [
X
CH] to select “AV”.
Check the connections to the other equipment.
31
31
Black bands appear in the
recording.
Move the other equipment away from the television as it may be picking up interference.
The copy of a videotape or DVD is
very poor.
This unit complies with industry standards regarding the recording and duplication of copy-
protected material. This includes commercial videotapes and DVDs. Consequently, copying
not only infringes copyright laws but also presents serious technical difficulties. Even in cases
where a copy can be made, the quality will be very poor.