Panasonic SAPM23-MULTI SAPM23 User Guide - Page 12
Timer continued, Using the play or record timer
View all Panasonic SAPM23-MULTI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Timer (continued) Using the play or record timer You can set the timer to come on at a certain time to wake you up (play timer) or to record from the radio or music port source (record timer). Preparation Turn the unit on and set the clock (refer to page 11). Timer Play timer Action Prepare the music source you want to listen to; cassette, disc, radio or music port source, and set the volume. Record timer Check the cassette's erasure prevention tabs (refer to page 9), insert the cassette and tune to the radio station (refer to page 10) or select the music port source (refer to page 13). 1 Press [CLOCK/TIMER] repeatedly to select your desired timer. CLOCK ˚ PLAY ˚ REC Original display 2 Within 5 seconds, press [ /REW/4] or [ /FF/¢] to set the starting time. Start time Other basic operations To Action change the settings Repeat steps 1 to 4 and 6. change the source or volume 1) Press [˚PLAY/REC] to clear the timer indicator from the display. 2) Make changes to the source or volume. 3) Perform steps 5 and 6. check the settings Press [CLOCK/TIMER] repeatedly to (when the unit is on select ˚PLAY or ˚REC. or in standby mode) cancel Press [˚PLAY/REC] to clear the timer indicators from the display. Note • The play timer and record timer cannot be used together. • The play timer will start at the preset time, with the volume increasing gradually to the preset level. • The record timer will start 30 seconds before the set time, with the volume muted. • The timer comes on at the set time every day if the timer is on. • The unit must be in the standby mode for the timer to function. • If you turn the unit off and on again while a timer is functioning, the finish time setting will not be activated. • If MUSIC PORT is selected as the source when the timer comes on, the system turns on and engages MUSIC PORT as the source. If you wish to playback or record from the portable audio equipment, activate the equipment's play mode and increase the volume. (See the portable audio equipment's instruction manual.) Play timer indicator Record timer indicator 3 Press [CLOCK/TIMER] to confirm. 4 Repeat steps 2 and 3 to set the finishing time. Finish time To activate the timer 5 Press [˚PLAY/REC] to turn on your desired timer. ˚ PLAY ˚ REC no display (off) 6 Press [y] to turn off the unit. The unit must be off for the timers to operate. RQTV0080 12