Panasonic SAPM23-MULTI SAPM23 User Guide - Page 5

Placement Of Speakers, Tep

Page 5 highlights

ENGLISH English Step 2 - Inserting batteries into the remote control Step 3 - DEMO function ■ Batteries • Insert so the poles (+ and -) match those in the remote control. • Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place. • Do not use rechargeable type batteries. • Mishandling of batteries in the remote control can cause electrolyte leakage, which may cause a fire. Do not: • mix old and new batteries; • use different types of batteries at the same time; • heat or expose to flame; • take apart or short-circuit; • attempt to recharge alkaline or manganese batteries; • use batteries if their covering has been peeled off. ■ Use Aim at the remote control sensor, avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit. Refer to page 6 for remote control signal sensor position. When the unit is first plugged in, a demonstration of its functions may be shown on the display. If the demo setting is off, you can show a demonstration by selecting "DEMO ON". Press and hold [7, -DEMO]. The display changes each time the button is held down. While in standby mode, select "DEMO OFF" to reduce power consumption. Placement of speakers English Speakers are designed identically so that no left or right channel orientation is necessary. Use only the supplied speakers. The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and sound quality will be negatively affected. Note • Keep your speakers at least 10 mm (13/32˝) away from the system for proper ventilation. • These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism. • You cannot take the front net off the speakers. RQTV0080 Caution • Use the speakers only with the recommended system. Failure to do so can damage the amplifier and speakers, and can cause fire. Consult a qualified service person if damage occurs or if a sudden change in performance is apparent. • Do not attach these speakers to walls or ceilings. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

RQTV0080
5
ENGLISH
English
English
Step 2
Step 2
- Inserting batteries into the remote control
- Inserting batteries into the remote control
Batteries
• Insert so the poles (+ and –) match those in the remote control.
Remove if the remote control is not going to be used for a long period of
time. Store in a cool, dark place.
• Do not use rechargeable type batteries.
• Mishandling of batteries in the remote control can cause electrolyte
leakage, which may cause a fire.
Do not:
• mix old and new batteries;
• use different types of batteries at the same time;
• heat or expose to flame;
• take apart or short-circuit;
• attempt to recharge alkaline or manganese batteries;
• use batteries if their covering has been peeled off.
Use
Aim at the remote control sensor, avoiding obstacles, at a maximum
range of 7
m (23 feet) directly in front of the unit.
Refer to page 6 for remote control signal sensor position.
S
tep
3
- DEMO function
- DEMO function
When the unit is first plugged in, a demonstration of its functions may be
shown on the display.
If the demo setting is off, you can show a demonstration by selecting
“DEMO ON”.
Press and hold [
7
, -DEMO].
The display changes each time the button is held down.
While in standby mode, select “DEMO OFF” to reduce power
consumption.
Placement of speakers
Speakers are designed identically so that no left or right channel orientation is necessary.
Use only the supplied speakers.
The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and sound
quality will be negatively affected.
Note
• Keep your speakers at least 10
mm (
13
/
32
˝) away from the system for proper ventilation.
• These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced
by magnetism.
• You cannot take the front net off the speakers.
Caution
Use the speakers only with the recommended system. Failure to do so can damage the amplifier and
speakers, and can cause fire. Consult a qualified service person if damage occurs or if a sudden
change in performance is apparent.
• Do not attach these speakers to walls or ceilings.