Panasonic SAPM29 SAPM29 User Guide - Page 4

A 1 3 R6, AA, UM-3 2 2 B Remote control signal sensor 8 POWER AC IN / h REC S.SOUND EQ PLAY LIST RE-MASTER AUX CD CHECK TUNER/BAND CD q/ h VOLUME STOP g TAPE 7 - DEMO CD 1 CD 2 CD 3 CD 4 CD 5 DOWN PUSH ENTER RETRUN ; CD CHANGE ; OPEN/ CLOSE UP PHONES 30 Transmission window 30 About 7 meters in front of the signal sensor. C The remote control A Battery installation Use of batteries l Align the poles (+ and -) properly when inserting the batteries. l Do not mix old and new batteries or different types of batteries. l Do not recharge ordinary dry cell batteries. l Do not heat or disassemble the batteries. Do not allow them to contact flame or water. l Remove the batteries if the unit is not to be used for a long time. l Do not keep together with metallic objects such as necklaces. l Do not use rechargeable type batteries. l Do not use batteries if the covering has been peeled off. Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire. If electrolyte leaks from the batteries, consult your dealer. Wash thoroughly with water if electrolyte comes in contact with any part of your body. B Correct method of use Operation notes l Do not place obstacles between the remote control signal sensor and remote control unit. l Do not expose the remote control signal sensor to direct sunlight or to the bright light of a fluorescent light. l Take care to keep the remote control signal sensor and the end of the remote control unit free from dust. l If this system is installed in a rack with glass doors, the glass doors' thickness or color might make it necessary to use the remote control unit a shorter distance from the system. To prevent damage l Do not place heavy items on the remote control. l Do not disassemble or reconstruct. l Do not spill water or other liquids on the remote control. C Placement of speakers Speakers are designed identically so that no left or right channel orientation is necessary. Note l Keep your speakers at least 10 mm away from the system for proper ventilation. l These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism. l To avoid damage to the speakers, do not touch the speaker cones if you have taken the nets off. RQT7372 4