Panasonic SC-HC295 Owners Manual - Page 12

Sound effects External equipment 1 Press [SOUND] repeatedly to select the sound effect. 2 Press [R, T] to select the setting and then press [OK]. PRESET EQ BASS TREBLE D.BASS "HEAVY", "SOFT", "CLEAR", "VOCAL" or "FLAT" -4 to +4 -4 to +4 "ON D.BASS" or "OFF D.BASS" SURROUND "ON SURROUND" or "OFF SURROUND" Note: The default setting is underlined. Changed settings will be kept until it is changed again, unless otherwise indicated. You can connect the AUX IN terminal to a portable audio equipment, PC, etc., to use this system as a speaker for enhanced sound quality. Preparation • Turn off the equalizer (if any) of the portable audio equipment to prevent sound distortion. • Decrease the volume of the system and the portable audio equipment before you connect or disconnect the portable audio equipment. Audio cable (not supplied) Portable audio equipment (not supplied) Saving the sound settings You can save the current sound effects (up to 3 combinations). Preparation Select the sound effects. 1 Press [SETUP] to select "SAVE MY SOUND". 2 Press [R, T] to select a sound setting number and then press [OK]. "SAVED" is shown. The new setting replaces the one existing in the same sound setting number. To recall the setting 1 Press [SOUND] to select "MY SOUND". 2 Press [R, T] to select the sound setting number and then press [OK]. 1 Connect the portable audio equipment. Plug type: Ø 3.5 mm (1/8″) stereo (not supplied) 2 Press [RADIO/AUX] to select "AUX". 3 Play the portable audio equipment. To adjust the input level 1 Press [SOUND] repeatedly to select "INPUT LEVEL". 2 Press [R, T] to select "NORMAL" or "HIGH" and then press [OK]. Note: • The default setting is "NORMAL". • Select "NORMAL" if the sound is distorted during "HIGH" input level. • Read the operating instructions of the portable audio equipment for details. • Components and cables are sold separately. TQBJ2048 12