Panasonic SC HC3 Compact Stereo System - Page 4

Connections Portable audio equipment (Cords and equipment not included) Portable audio player Plug type: Ø3.5 mm (1/8") stereo MAIN UNIT ➡ Start playback from the portable audio source. REMOTE CONTROL Note • Adjust the volume and sound quality of this unit and the other equipment. Reduce the level of input signal (for example, by switching off the equalizer or reducing the volume) of the other equipment before connection. High levels of input signal will distort the sound. • For details, refer to the instruction manual of the other equipment. AUX 75Ω LOOP EXT FM ANT AM ANT LOOP ANT GROUND AC IN 3 12 1 Connect the FM indoor antenna. Adhesive tape FM indoor antenna '.7
5"Ω/5 Tape the antenna to a wall or column, in a position with the least amount of interference. 2 Connect the AM loop antenna. 1 2 3 AM loop antenna Use a Phillips-head screwdriver, etc. Black White Red Stand the antenna up on its base. RQTX0250 Click! Keep the loose antenna cord away from other wires and cords. Do not screw too tightly. Otherwise, the screwdriver goes around in circles and cannot be fixed. 4 Headphones (not included) Reduce the volume level and connect the headphones. Plug type: Ø3.5 mm (1/8") stereo. Note • Avoid listening for prolonged periods of time to prevent hearing damage. • Excessive sound pressure from earphones and headphones can cause hearing loss. 3 Connect the AC power supply cord. Connect the AC power supply cord after all other connections are complete. To household AC outlet Note To save power when the unit is not to be used for a long time, unplug it from the household AC power supply cord. You will need to reset some memory items after plugging in the unit. Conserving power The unit consumes approx. 0.08 W even when it is turned off with [8, POWER]. To save power when the unit is not to be used for a long time, unplug it from the household AC outlet. Remember to reset the radio stations and any other memory items before using the unit again.