Panasonic SC HC3 Compact Stereo System - Page 5
Preparing the remote control, Demo function, Connections continued
UPC - 037988983506
View all Panasonic SC HC3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Connections (continued) Optional antenna connections FM outdoor antenna FM outdoor antenna (not included) AM outdoor antenna AM outdoor antenna (not included) 1 2 3 5 to 12 m (16 to 40 ft.) 75 Ω coaxial cable (not included) AM loop antenna (included) • Never use an outdoor antenna during a lightning storm. • You can connect the FM outdoor antenna for better reception. Please consult your dealer for installation. • Disconnect the FM indoor antenna if an FM outdoor antenna is installed. • Connect the AM outdoor antenna without removing the AM loop antenna. Run 5 to 12 m (16 to 40 feet) of vinyl-covered wire horizontally along a window or other convenient location. Preparing the remote control R6/LR6, AA Place this side in before the other side ■ Batteries • Use a manganese dry battery or an alkaline dry battery. • Insert so the poles (+ and - ) match those in the remote control. • Remove if the remote control is not going to be used for a long period of time. • Store in a cool, dark place. • Do not heat or expose to flame. • Do not leave the batteries in an automobile exposed to direct sunlight for a long period of time with doors and windows closed. • Mishandling of batteries in the remote control can cause electrolyte leakage, which may cause a fire. Do not: • mix old and new batteries; • use different types of batteries at the same time; • take apart or short-circuit; • attempt to recharge alkaline or manganese batteries; • use batteries if their covering has been peeled off. Remote control signal sensor ˃˃ Transmission window ■ Use • Aim at the sensor, avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit (Exact distance depends on angles). • Operation can be affected by strong light sources, such as direct sunlight, and the glass doors on cabinets. Demo function Top View (Top Panel) POWER DEMO [g, -DEMO] When the unit is first plugged in, a demonstration of its functions may be shown on the display. If the demo setting is off, you can show a demonstration by selecting "DEMO ON". Press and hold [g, -DEMO]. The display changes each time the button is held down. DEMO OFF DEMO ON 5 While in standby mode, select "DEMO OFF" to reduce power consumption. RQTX0250