Panasonic SC-HC400 Owners Manual - Page 18

Attaching the unit to a wall (optional) This unit can be wall mounted using the supplied wall mount brackets, safety holder, etc. Make sure that the wall and the screws used for securing to the wall are capable of supporting at least 36 kg (79.4 lbs). The screws and other items are not supplied as the type and size will vary with each installation. ≥ Refer to step 6 and step 7 of "Wall mount instructions" for details about the required screws. ≥ As an additional protective measure, attach the unit to the wall with the fall prevention cord. Installation accessories ∫ Supplied accessories ≥ 2 Wall mount brackets ≥ 1 Safety holder ≥ 1 Wall mounting sheet ∫ Additionally required accessories (commercially available) ≥ 4 Wall mount bracket fixing screws ≥ 2 Safety holder fixing screws ≥ 1 Fall prevention cord* ≥ 1 Screw eye * Use a cord that is capable of supporting over 36 kg (79.4 lbs) (with a diameter of about 1.5 mm (1/16q)). ≥ Keep the screws out of reach of children to prevent swallowing. ≥ Keep the wall mount brackets out of reach of children to prevent swallowing. ≥ Keep the screw eye out of reach of children to prevent swallowing. Safety precautions Professional installation is required. The installation should never be done by any other than a qualified installation specialist. PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND/OR SERIOUS INJURY, INCLUDING DEATH RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING. WARNING: To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation instructions. Wall mount instructions Before installation, turn the unit off and disconnect the AC power supply cord from the AC outlet. 1 Unscrew the fixing screw at the rear of the unit. Stand Fixing screw Soft blanket or cloth 2 Detach the stand from the unit while pressing the catches upward. ≥ While lifting the catches upwards, gently pull the stand forward. Keep the removed screw and stand for future use. ≥ When using the unit in a non-wall-mounted position again, be sure to reattach the stand to the unit and secure it with its screw. 3 Attach the fall prevention cord (not supplied) to this unit.    18 TQBJ2049 A Fall prevention cord (not supplied) ≥ Bend the cord twice from the tip, each at 45o and 5 mm (3/16q) apart for it to go through the holes. B 5 mm (3/16q)