Panasonic SC-HTE80 SC-HTE80 Owner's Manual - Page 15

ENGLISH Specifications Amplifier section RMS output power: Dolby Digital mode Front Ch 30 W per channel (6 Ω), 1 kHz, 10% THD Subwoofer Ch 60 W per channel (3 Ω), 100 Hz, 10% THD Total RMS Dolby Digital mode power 120 W FTC output power: Dolby Digital mode Front Ch 16 W per channel (6 Ω), 170 Hz to 20 kHz, 1% THD Subwoofer Ch 28 W per channel (3 Ω), 45 Hz to 170 Hz, 1% THD Total FTC Dolby Digital mode power 60 W Terminals section HDAVI Control This unit supports "HDAVI Control 5" function HDMI AV input Input connector Type A (19 pin) HDMI AV output Output connector Type A (19 pin) Digital audio input Optical digital input Optical terminal Sampling frequency 32 kHz, 44.1 kHz, 48 kHz 88.2 kHz, 96 kHz (only LPCM) Audio format Dolby Digital, DTS Digital Surround, LPCM Analog audio input Audio input Pin jack (1 system) USB port For service use only Bluetooth® section Bluetooth® system specification Version 3.0 Wireless equipment classification Class 2 Supported profiles A2DP Operating frequency 2402 MHz to 2480 MHz Operation distance 10 m (33 ft) line of sight Speaker section Front speaker (built-in) Type 1 way, 1 speaker system (bass reflex) Speaker unit(s) Full range 3.8 cm x 9 cm (1½″ x 31732″) cone type x 2 Subwoofer (built-in) Type 1 way, 2 speaker system (bass reflex) Speaker unit(s) Woofer 8 cm (3532″) cone type x 2 General Power supply AC 120 V, 60 Hz Power consumption 27 W Dimensions (W x H x D) 460 mm x 60 mm x 280 mm (18⅛″ x 2⅜″ x 11132″) Mass (Weight) 3.2 kg (7.1 lbs) Maximum loading weight 30 kg (66 lbs) Operating temperature range 0°C to +40°C (+32°F to +104°F) Operating humidity range 20% to 80% RH (no condensation) Power consumption in standby mode (With "BLUETOOTH STANDBY" set to "OFF") 0.2 W (approximate) Note: • Specifications are subject to change without notice. Mass (weight) and dimensions are approximate. • Total harmonic distortion is measured by the digital spectrum analyzer. RQT9860 15