Panasonic SC-PMX80 Owners Manual - Page 6

TQBJ2004 Bluetooth® operations By using the Bluetooth® connection, you can listen to the sound from the Bluetooth® audio device from this system wirelessly. • Refer to the operating instructions of the Bluetooth® device for details. Connecting via Bluetooth® menu Preparation • Turn on the Bluetooth® feature of the device and place the device near this unit. Pairing with Bluetooth® devices 1 Press [ ] to select "BLUETOOTH". If "PAIRING" is indicated on the display, go to step 3. 2 Press [PLAY MENU] to select "PAIRING" and then press [OK]. Alternatively, press and hold [ -PAIRING] on the unit. 3 Select "SC-PMX80" from the Bluetooth® device's Bluetooth® menu. The MAC address (e.g., 6C:5A:B5:B3:1D:0F) may be displayed before "SC-PMX80" is displayed. The name of the connected device is indicated on the display for a few seconds. 4 Start playback on the Bluetooth® device. 6 Connecting a paired Bluetooth® device 1 Press [ ] to select "BLUETOOTH". "READY" is indicated on the display. 2 Select "SC-PMX80" from the Bluetooth® device's Bluetooth® menu. The name of the connected device is indicated on the display for a few seconds. 3 Start playback on the Bluetooth® device. Note: • If prompted for the passkey, input "0000". • You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used for the longest will be replaced. • This unit can only be connected to one device at a time. • When "BLUETOOTH" is selected as the source, this unit will automatically try and connect to the last connected Bluetooth® device. ("LINKING" is indicated on the display during this process.) If the connection attempt fails, try to establish a connection again. Bluetooth® transmission mode You can change the transmission mode to prioritize transmission quality or sound quality. Preparation • Press [ ] to select "BLUETOOTH". • If a Bluetooth® device is already connected, disconnect it. 1 Press [PLAY MENU] repeatedly to select "LINK MODE". 2 Press [2, 1] to select the mode and then press [OK]. MODE 1: Emphasis on connectivity MODE 2: Emphasis on sound quality Note: • Select "MODE 1" if the sound is interrupted. • When enjoying video contents with this function, the video and audio output may not be synchronised. In this case, select "MODE 1". • The factory default is "MODE 2". Bluetooth® input level If the sound input level from the Bluetooth® device is too low, change the input level setting. Preparation • Connect a Bluetooth® device. 1 Press [PLAY MENU] repeatedly to select "INPUT LEVEL". 2 Press [2, 1] to select the level and then press [OK]. "LEVEL 0" ,. "LEVEL i1" ,. "LEVEL i2" J Note: • Select "LEVEL 0" if the sound is distorted. • The factory default is "LEVEL 0". Disconnecting a Bluetooth® device 1 While a Bluetooth® device is connected: Press [PLAY MENU] repeatedly to select "DISCONNECT?". 2 Press [2, 1] to select "OK? YES" and then press [OK]. Note: • You can also disconnect the Bluetooth® device by pressing and holding [ -PAIRING] on the unit. • The Bluetooth® device will be disconnected if a different audio source (e.g., "CD") is selected. Bluetooth® standby When "SC-PMX80" is selected from a paired Bluetooth® device's Bluetooth® menu, this unit will turn on automatically from standby mode and establish a Bluetooth® connection. 1 Press [SETUP] repeatedly to select "BLUETOOTH STANDBY". 2 Press [2, 1] to select "ON" and then press [OK]. Note: • To turn the function off, select "OFF" in step 2. • The factory default is "OFF". If this function is set to "ON", the standby power consumption will increase.