Panasonic SC-PMX80 Owners Manual - Page 9

FM radio 30 FM stations can be preset. Preparation Press [RADIO, EXT-IN] repeatedly to select "FM". Automatic presetting 1 Press [RADIO MENU] to select "A.PRESET". 2 Press [2, 1] to select "LOWEST" or "CURRENT" frequency. LOWEST: To begin auto preset with the lowest frequency (FM 87.9 or FM 87.5). CURRENT: To begin auto preset with the current frequency*1. 3 Press [OK] to start presetting. • The tuner starts to preset all the stations it can receive into the channels in ascending order. To cancel, press [∫]. *1: To change the frequency, refer to "Manual tuning and presetting". Manual tuning and presetting 1 Press [6] or [5] to tune in to the station. • Alternatively, press [:/6] or [5/9] on the main unit when "MANUAL" is selected as the tune mode*2. To tune automatically, press and hold the button until the frequency starts changing quickly. 2 Press [PROGRAM]. 3 Press the numeric buttons to select a preset number. Do steps 1 through 3 again to preset more stations. The new station replaces any station that occupies the same preset number. Selecting a preset station Press the numeric buttons, [:] or [9] to select the preset station. • Alternatively, press [:/6] or [5/9] on the main unit when "PRESET" is selected as the tune mode*2. *2: To change the tune mode 1 Press [RADIO MENU] repeatedly to select "TUNE MODE". 2 Press [2, 1] to select "MANUAL" or "PRESET", and then press [OK]. To display the current FM signal status Press [DISPLAY]. "FM ST": FM stereo broadcast is being received. "FM - - - -": No broadcast is received or FM broadcast received is weak or in monaural. "FM MONO": You have set the "FM MODE" to "MONO". ( 11, "If noise is excessive during FM reception.") Note: • "STEREO" is displayed when this unit tunes to a stereo broadcast. Clock and timers Setting the clock This is a 12-hour clock. 1 Press [CLOCK/TIMER] to select "CLOCK". 2 Press [3, 4] to set the time and then press [OK]. To check the time Press [CLOCK/TIMER]. Note: • Reset the clock regularly to maintain accuracy. Sleep timer The sleep timer switches off the system after the set time. Press [SLEEP] repeatedly to select the setting (in minutes). "SLEEP 30" -. "SLEEP 60" -. "SLEEP 90" -. "SLEEP 120 OFF" (Cancel b Note: • The remaining time is indicated on the unit's display at every minute except when other operations are performed. "SLEEP 1" is always shown when only 1 minute remains. • The sleep timer can be used together with the play timer. • The sleep timer always comes first. Be sure not to set an overlap of timers. Play timer You can set the timer to come on at a certain time to wake you up. Preparation Set the clock. 1 Press [CLOCK/TIMER] repeatedly to select "TIMER ADJ". 2 Press [3, 4] to set the starting time ("ON TIME") and then press [OK]. 3 Press [3, 4] to set the finishing time ("OFF TIME") and then press [OK]. 4 Press [3, 4] to select the music source*3 and then press [OK]. Turning the timer on 1 Prepare the selected music source and set the desired volume. 2 Press [F, PLAY]. "F" is shown. To cancel, press [F, PLAY] again. The system must be switched off for the timer to operate. To check the settings Press [CLOCK/TIMER] repeatedly to select "TIMER ADJ". (During standby, press [CLOCK/TIMER] twice.) Note: • The timer starts at a low volume and increases gradually to the preset level. • The timer comes on at the set time every day if the timer is on. • If you switch off the system and switch on again while a timer is in operation, the timer will not stop at the end time. *3: "CD", "USB", and "FM" can be set as the music source. • For timer music source through the port for iPhone/ iPad/iPod and USB devices, select "USB". 9 TQBJ2004