Panasonic SCHC40 SAHC40 User Guide - Page 6

ENGLISH Attaching the unit to a wall (Optional) (continued) Wall mount instructions • Before installation, turn the unit off and disconnect the AC power supply cord plug from the AC receptacle. • Tighten screws firmly to prevent slack in each step. 1. Detach the stand from the unit.  Unscrew the fixing screw A (2 pieces) at the bottom of the unit. Keep the removed screws in a safe place. Bottom of main unit  Slide the stand off the unit. Stand Soft blanket or cloth Fixing screw A 2. Attach the wall bracket to the back of the unit.  Align both tabs on the wall bracket and the main unit, then slide it in until it clicks into place. Wall bracket (bottom view)  Secure the wall bracket with fixing screw B (2 pieces). [Tightening torque: 1.2 Nm (57/64 lb-ft) to 1.5 Nm (1 7/64 lb-ft)] Fixing screw B 2 Tab Rear of 1 main unit 3. Drive the mounting screws into the wall.  Measure and mark the position of the mounting screw C (2 pieces) and drive them into the wall. • Use figures below for screw positions and measurements. • Please install using both wall mounting screws. • Use a level ruler to ensure both screws are level. • Use a screw which is strong enough to support the weight of at least 20 kg (44 lb.). Rear View 300 mm (11 13/16") Space required RQTX1146 130 mm (5 1/8") 74.8 mm (2 15/16") 6 6 AUX 77.5 mm (3 1/16") 85.5 mm (3 3/8") 500 mm (19 11/16") 700 mm (27 9/16") Wall 163 mm (6 7/16") Mounting screw C Space required A length which supports the strength of 20 kg (44 lb.) or more must be kept for each screw. 4 mm (5/32") 8 mm (5/16") to 9.5 mm (3/8") 2.2 mm (3/32") to 2.8 mm (7/64") 2.5 mm (3/32") to 3.5 mm (9/64")