Panasonic SCHC40 SAHC40 User Guide - Page 9

ENGLISH Disc operations g Inserting a disc  Press [^] to turn the unit on.  Press [;, CD] to open the sliding door.  With the label of the disc facing towards you, tilt the disc into the disc tray under the sliding door. Basic play  Press [^] to turn the unit on.  Insert the disc to be played (➡ left).  Press [CD q/h] to start play. Stop Press [g, ]. Pause Press [CD q/h]. Press again to resume play. Skip track Press [u] or [i]. Search the current track (CD) Skip album (MP3) Press and hold [u] or [i]. Press [e,r]. Direct access play (Play starts with the track you select.) CD: Press the numeric buttons to select the track. MP3:  Press [e,r] to select the album.  Press [i] once and then the numeric buttons to select the track.  Place the disc onto the spindle in the center and then push the disc down until it clicks into place. Click!!  Press [;, CD] to close the sliding door. Keep fingers away from the sliding door when it is closing to avoid possible minor injuries. g Removing a disc  Press [;, CD] to open the sliding door.  Hold the center and the top right of the disc and pull the top right of the disc to unlock it from the spindle.  Tilt the disc so as not to touch the sliding door and remove the disc. • Damage may occur if the sliding door is forced closed. • Be careful of CD hitting the sliding door while being removed. Program play Enables you to program up to 24 tracks.  Press [CD q/h] and then [g, ].  Press [PROGRAM]. CD:  Press the numeric buttons to select the track. To program more tracks, continue by pressing the numeric buttons.  Press [OK] or [CD q/h] to start play. MP3:  Press [e,r] to select the album.  Press [i] once and then the numeric buttons to select the track.  Press [OK]. To program more tracks, repeat step  to .  Press [CD q/h] to start play. Cancel program mode Press [PROGRAM] in the stop mode to clear "PGM" indicator from the display. Replay the program Press [PROGRAM] in the stop mode and then [CD q/h]. Check program contents Press [u] or [i] when "PGM" is displayed in the stop mode. To check while programming, press [PROGRAM] twice after "PGM" appears and then press [u] or [i]. Delete last programmed track Clear all programmed tracks Press [DEL] in the stop mode. Press [g, ] in the stop mode. "CLR ALL" is displayed. Within 5 seconds, press the button again to clear all tracks. • The program memory is cleared when you open the sliding door. Display function Press [DISPLAY, -DIMMER] repeatedly during play or pause to view the current track's information. • Maximum number of displayable characters: approximately 30 • This unit supports ver. 1.0 and 1.1 ID3 tags. Text data that is not supported will not be displayed. RQTX1146 9 9