Panasonic SCNA30 SCNA10 User Guide - Page 8

About the power of this unit This unit has a built-in battery. Please charge the battery before using this unit for the first time. ∫ Charging the battery Connect the AC adaptor to the [NA30] household AC outlet. Rear view • If charging is necessary, the Battery indicator (red) lights. When charging is complete, the Battery indicator goes off. About the battery status Battery indicator (red) (> 6, 7) Fast blinking (at approximately 1 second intervals) Slow blinking (at approximately 2 second intervals) Battery status About 5%*1 About 15%*1 *1 These battery statuses of the unit serve only as an approximation, and may vary according to the conditions of use. AC adaptor (supplied) [NA10] To a household AC outlet Battery life in use/Battery charge time/Rechargeable times Battery life in use Battery life in use (LP mode) Battery Charge time Rechargeable times [NA30] Approx. 14 hours*2 Approx. 20 hours*2 Approx. 3 hours*3 About 500 times [NA10] Approx. 10 hours*2 Approx. 20 hours*2 Approx. 3 hours*3 About 500 times *2 Calculated by the test method established by the company [while connecting with Bluetooth®, using at the surrounding temperature of 25 oC (i77 oF)] *3 When charging at the surrounding temperature of 25 oC (i77 oF) after the battery is depleted. ∫ Using the unit by connecting it to a household AC outlet Press [Í/I] to turn on the unit. Connecting the AC adaptor before turning on the unit allows you to supply power from a household AC outlet during use. • It takes longer to charge while this unit is turned on. VQT5C36 8