Panasonic SCNE1 SCNE1 User Guide - Page 7

ENGLISH Bluetooth® operations By using the Bluetooth® connection, you can listen to the sound from the Bluetooth® audio device from this unit wirelessly. ≥ Refer to the operating instructions of the Bluetooth® device for details. Pairing Bluetooth® devices Preparation ≥ Turn on the Bluetooth® feature of the device and place the device near this unit. ≥ If this unit is already connected to a Bluetooth® device, disconnect it. 1 Press [ , AUX] to select "BLUETOOTH". ≥ If "PAIRING" is indicated on the display, go to step 3. 2 Press [PLAY MENU] to select "NEW DEV." and then press [OK]. {. "PAIRING" is indicated on the display. 3 Select "SC-NE1" from the Bluetooth® device's Bluetooth® menu. 4 Start play on the Bluetooth® device. Bluetooth® transmission mode You can change the transmission speed to prioritize transmission quality or sound quality. Preparation ≥ Press [ , AUX] to select "BLUETOOTH". ≥ If a Bluetooth® device is already connected, disconnect it. 1 Press [PLAY MENU] repeatedly to select "LINK MODE". 2 Press [3, 4] to select the mode and then press [OK]. MODE 1: Emphasis on connectivity MODE 2: Emphasis on sound quality ≥ If prompted for the passkey, input "0000". ≥ You can register up to 8 devices with this unit. If a 9th device is paired, the device that has not been used for the longest time will be replaced. Connecting a paired Bluetooth® device Preparation ≥ Turn on the Bluetooth® feature of the device and place the device near this unit. ≥ If this unit is already connected to a Bluetooth® device, disconnect it. 1 Press [ , AUX] to select "BLUETOOTH". {. "READY" is indicated on the display. 2 Select "SC-NE1" from the Bluetooth® device's Bluetooth® menu. {. The name of the connected device is indicated on the display for 2 seconds. 3 Start play on the Bluetooth® device. ≥ This unit can only be connected to one device at a time. ≥ When "BLUETOOTH" is selected as the source, this unit will automatically try and connect to the last connected Bluetooth® device. ≥ The Bluetooth® device will be disconnected if "AUX" is selected as an audio source. ≥ The default setting is "MODE 1". Bluetooth® input level If the sound input level of the Bluetooth® transmission is too low, change the input level setting. Preparation ≥ Connect a Bluetooth® device. 1 Press [PLAY MENU] repeatedly to select "INPUT LEVEL". 2 Press [3, 4] to select the level and then press [OK]. "LEVEL 0" ,. "LEVEL +1" ,. "LEVEL +2" J ≥ Select "LEVEL 0" if the sound is distorted. ≥ The default setting is "LEVEL 0". Disconnecting a Bluetooth® device 1 While a Bluetooth® device is connected: Press [PLAY MENU] to select "DISCONNECT?". 2 Press [3, 4] to select "OK? YES" and then press [OK]. 7 VQT4T91