Panasonic SCPM19 Mini Hes W/cd Player - Page 20
CASSETTE TAPES, TPS: Tape Program Sensor
View all Panasonic SCPM19 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
4/REW/4, 3/FF/¢ STOP7, -DEMO 1 OPEN 0 2 TAPE 3 Top of the unit OPEN 1 3 2 B Insert inside the guides Forward side B Cassette tapes 1 Press [OPEN 0] to insert a cassette. Close the lid by hand. 2 Press [TAPE 3] to start playback. Repeat step 1 and 2 to play the other side of the tape. 3 Adjust the volume. To stop tape playback start one touch play fast-forward and rewind Action Press [STOP 7, - DEMO]. Press [TAPE 3] when the system is OFF with the cassette loaded. Press [4/REW/4] or [3/FF/¢] in the stop mode. Cassette tape selection and care Types of cassettes which can be played correctly Only normal position tapes are recommended. NORMAL POSITION/TYPE I HIGH POSITION/TYPE II ✕ METAL POSITION/TYPE IV ✕ • Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism. • Tape slack can get caught up in the mechanism and should be wound up before the tape is played. • Endless tapes can get caught up in the deck's moving parts if used incorrectly. To find the beginning of a program (TPS: Tape Program Sensor) TPS finds the beginning of a track and resumes play from there. Each press increases the number of tracks skipped, up to a maximum of 9. Press [4/REW/4] or [3/FF/¢] during play. Note The TPS function searches for silent parts of about 4 seconds in length which are normally found between tunes. As a result, it may not function properly in the following cases: • With short silent parts • When noise occurs between tunes • With silent parts found within tunes 3 VOLUME DOWN UP Listening operations 20 RQT7364