Panasonic SCSP100 SCSP100 User Guide - Page 10

Troubleshooting guide Specifications ENGLISH ESPAÑOL Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, refer to "Customer Services Directory (United States and Puerto Rico)" on page 13 if you reside in the U.S.A. or Puerto Rico, or refer to "Product information" on page 11 if you reside in Canada. No power • Ensure the AC power supply cord is connected properly. No sound • Adjust the volume. • Check if mute function is enabled. • Update your iPod or iPhone with the latest software. • The iPod or iPhone was incorrectly inserted into the dock. Turn off the iPod or iPhone, remove it from the dock connector. Reinsert it and turn it on again. Remote control is • Replace the battery. not functioning • Ensure the iPod or iPhone is seated properly into the unit. Distorted sound • Reduce the volume. • Set the "EQ" setting of the iPod to "Off" or "Flat". iPod or iPhone does not charge • Check the connections. (\ page 7) Unable to use PC synchronization • Turn the main unit on. • Check PC and iPod or iPhone connections. (\ page 7, 9) ENGLISH RQTX1012 Maintenance To clean this unit, wipe with a soft, dry cloth. • Never use alcohol, paint thinner or benzine to clean this unit. • Before using chemically treated cloth, read the instructions that came 10 with the cloth carefully. AMPLIFIER SECTION RMS output power stereo mode Front Ch (both channels driven) 5 W per channel (6 Ω), 1 kHz, 10% THD Subwoofer Ch 10 W per channel (6 Ω), 100 Hz, 10% THD Total RMS stereo mode power 20 W TERMINALS SECTION Music port (rear) Sensitivity Terminal 350 mV, 13.2 kΩ Stereo, 3.5 mm (1/8") jack SPEAKER SECTION Front speakers Speaker unit(s) Full range Input power (IEC) Impedance: 6 Ω 4 cm (1 5/8") cone type 5 W (Max) Subwoofer Speaker unit(s) Woofer Passive radiator (x2) Input power (IEC) Impedance: 6 Ω 6.5 cm (2 1/2") cone type 6.5 cm (2 1/2") 10 W (Max) GENERAL Power supply DC 12 V (DC IN terminal) Power consumption 16 W (unit only) AC adapter (switching power supply) AC 100 to 240 V, 50/60 Hz AC adapter power consumption 36 W Dimensions (WxHxD) 175 mm x 138.8 mm x 178.5 mm (6 7/8" x 5 15/32" x 7 1/6") Mass [Weight] 0.85 kg (1.87 lbs) Operating temperature range 0°C to +40°C (+32°F to +104°F) Operating humidity range 20% to 80% RH (no condensation) Power consumption in standby mode: 0.7 W (approximate) Note: 1) Specifications are subject to change without notice. Mass and dimensions are approximate. 2) Total harmonic distortion is measured by the digital spectrum analyser.