Panasonic SCSP100 SCSP100 User Guide - Page 6

Preparing the remote control ENGLISH ESPAÑOL ENGLISH Before using the remote control for the first time, remove the insulation sheet. Replace the remote control battery when it stops operating, or when the range seems reduced. Rear view 1 Insert an object and push down to unlock the catch. Lithium Button-Type battery (CR2025) CR2025 Pull Aim at the remote control signal sensor (\ page 8), avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the main unit. • Insert with poles aligned. • Do not touch the terminals (+ and -) with metal objects. • Do not recharge, disassemble, remodel, heat or throw into fire. • Keep out of reach of children. • Do not heat or expose to flame. • Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed. • Remove the battery if the remote control is not going to be used for a long period of time. Store in a cool, dark place. If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with water. If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes thoroughly with water, and then consult a doctor. RQTX1012 6 Warning Keep the Button-Type battery out of reach of children to prevent swallowing. Warning Risk of fire, explosion and burns. Do not disassemble, heat above 60°C (140°F) or incinerate. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. < For USA-California Only > This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.