Panasonic SCXH70 Service Manual - Page 22
Service Mode Table 3 For DVD
View all Panasonic SCXH70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
6.2.3. Service Mode Table 3 (For DVD) Mode Name Item Description FL Display Micro-processor firmware version display & EEPROM checksum display. Micro-processor firmware version display & EEPROM checksum display. EEPROM checksum is only available due to existence of EEPROM IC. Note: Condition 1/2/3 shows the state of EEPROM IC. FL Display sequence: Display 1 2 3. (Display 1) (Display 2) (Condition 1) Key Operation Front Key In STOP (no disc) mode, press [STOP] button on the main unit, and [7] button on the remote control unit. Cancelled automatically 5 seconds later. If the version of the EEPROM does not match, [NG] is displayed. (Condition 2) (a) If there is NO EEPROM header string OR (b) If there is no EEPROM (no data is received by Micro-processor), [NO] is displayed. (Condition 3) If the EEPROM version matches, checksum [YYYY] is displayed. (Display 3) Initialization Initialization. User settings are cancelled and player is initialized to factory setting. It is necessary when after replacement of Micro-processor (DV5 LSI) IC, FLASH ROM IC (IC8651), EEPROM IC (IC8611) & DVD Module P.C.B. DVD Module P.C.B. Reset To reset DVD Module P.C.B. This process is used when the DVD Module P.C.B. or FLASH ROM IC is replaced with a new one. Opecon Version EEPROM Checksum (If applicable, refer below.) Press [FL Display] button on remote control unit for next page. (FL Display) In STOP (no disc) mode, press [STOP] button on the main unit, and [ 10] button on the remote control unit. While in initialization mode, press & hold [STOP] button on the main unit for 3 seconds, follow by [ENTER] button on the remote control unit. 22