Home » Panasonic Manuals » DVD Players » Panasonic SCXH70 » Manual Viewer

Panasonic SCXH70 Service Manual - Page 27

DVD Module Error Code Table

Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

6.4.2. DVD Module Error Code Table Error Code Diagnosis Contents U702 HDMI/DVI I2C communication error Description of error The communication error of I2C when connecting it with HDMI/DVI. For instance, when EDID information to which information on the TV set side has been described cannot be read, it is generated. U703 HDMI/DVI attestation error When attestation (HDCP) with the TV side fails when connecting it with HDMI/DVI, it is generated. U704 HDMI/DVI SRM Riborcerar It is generated at the equipment to which the TV set is Riborced when connecting it with HDMI/DVI. U705 HDMI/DVI SRM disk falsification check error It is generated at the time of it is time when illegal the SRM data of the reproducing disk (verify error), when connecting it with HDMI/DVI. F740 HDMI device key I2C error when writing HDMI Key device into transmitter. F893 FLASH ROM IC data falsification error Firmware error, DV5.0 LSI IC (IC8651) error. F894 EEPROM IC abnormality error When failing in the access to EEPROM IC located in the DVD Module P.C.B. (IC8611). F895 Language area abnormal Firmware version agreement check for factory preset setting failure prevention. F897 Initialization error Incomplete initialization after writing of new firmware (Factory preset setting failure prevention) F899 The communication specification disagreement between micro-processor Unsuitable combination of number of system com and panel com used. (Frimware) Automatic FL Display Remarks Press [ STOP] on main unit for next error. Press [ STOP] on main unit for next error. Press [ STOP] on main unit for next error. Press [ STOP] on main unit for next error. Press [ STOP] on main unit for next error. Press [ STOP] on main unit for next error. Press [ STOP] on main unit for next error. Press [ STOP] on main unit for next error. Press [ STOP] on main unit for next error. Press [ STOP] on main unit for next error. 27

Section	Page
PSG0910006CE	1
DVD Home Theater Sound System	1
Model No. SA-PT75PH	1
1 Safety Precautions	3
1.1. GENERAL GUIDELINES	3
1.1.1. LEAKAGE CURRENT COLD CHECK	3
1.1.2. LEAKAGE CURRENT HOT CHECK	3
1.2. Before Repair and Adjustment	3
1.2.1. Caution for fuse replacement	3
1.3. Protection Circuitry	4
1.4. Safety Parts Information	4
2 Warning	5
2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatic Sensitive (ES) Devices	5
2.2. Precaution of Laser Diode	6
2.3. Service caution based on Legal restrictions	7
2.3.1. General description about Lead Free Solder (PbF)	7
2.4. Handling Precautions for Traverse Unit	8
2.4.1. Cautions to Be Taken in Handling the Optical Pickup Unit	8
2.4.2. Grounding for electrostatic breakdown prevention	8
2.4.2.1. Worktable grounding	8
2.4.2.2. Human body grounding	9
3 Service Navigation	10
3.1. Service Information	10
4 Specifications	11
5 Location of Controls and Components	13
5.1. Remote Control Key Button Operations	13
5.2. Main Unit Key Button Operations	14
5.3. Speaker Connection	14
5.4. Using the VIERA Link “HDAVI Control™”	15
5.5. Disc Information	17
5.5.1. Disc Playability (Media)	17
5.5.2. File Extension Type Support (WMA/MP3/JPEG/MPEG4/DivX)	18
6 Self-Diagnosis and Special Mode Setting	19
6.1. Cold-Start	19
6.2. Service Mode Table	19
6.2.1. Service Mode Table 1 (For DVD)	20
6.2.2. Service Mode Table 2 (For DVD)	21
6.2.3. Service Mode Table 3 (For DVD)	22
6.2.4. Service Mode Table 4 (For DVD)	23
6.3. Self-Diagnosis Mode	25
6.4. DVD Self Diagnostic Function-Error Code	26
6.4.1. Mechanism Error Code Table	26
6.4.2. DVD Module Error Code Table	27
6.4.3. Power Supply & Digital Amplifier Error Code Table	28
6.5. Sales Demonstration Lock Function	29
6.5.1. Setting	29
6.5.2. Cancellation	29
6.6. Firmware Version-Up Information	30
6.6.1. Process Flow (1/3)	30
6.6.2. Process Flow (2/3)	31
6.6.3. Process Flow (3/3)	32
7 Troubleshooting Guide	33
7.1. Troubleshooting Guide for F61 and/or F76	33
7.1.1. Block Diagram	33
7.1.2. Troubleshooting Guide	34
7.1.3. Part Location	35
7.1.3.1. SMPS P.C.B.	35
7.1.3.2. Main/D-Amp P.C.B.	36
7.2. Basic Troubleshooting Guide for Traverse Unit (DVD Module P.C.B.)	37
7.3. Basic Troubleshooting Guide for HDMI AV output	38
8 Disassembly and Assembly Instructions	40
8.1. Disassembly Flow Chart	41
8.2. Main Components and P.C.B. Locations	42
8.3. Disassembly of Top Cabinet	43
8.4. Disassembly of Component Video P.C.B.	43
8.5. Disassembly of Voltage Selector P.C.B.	44
8.6. Disassembly of Rear Panel	45
8.7. Disassembly of DVD Mechanism Unit (DLS6E)	45
8.8. Disassembly of DVD Module P.C.B.	47
8.9. Disassembly of SMPS P.C.B.	48
8.10. Replacement of Switching Regulator IC (IC5701)	49
8.10.1. Disassembly of Switching Regulator IC (IC5701)	49
8.10.2. Assembly of Switching Regulator IC (IC5701)	50
8.11. Replacement of Diode (D5802)	50
8.11.1. Disassembly of Diode (D5802)	50
8.11.2. Assembly of Diode (D5802)	51
8.12. Disassembly of Main/D-Amp P.C.B.	51
8.13. Replacement of Digital Amplifier IC (IC403/IC404/IC405)	52
8.13.1. Disassembly of Digital Amplifier IC (IC403/IC404/IC405)	53
8.13.2. Assembly of Digital Amplifier IC (IC403/IC404/IC405)	53
8.14. Disassembly of Front Panel Assembly	54
8.15. Disassembly of FL P.C.B.	55
8.16. Disassembly of Volume Button P.C.B.	56
8.17. Disassembly of Power Button P.C.B.	57
8.18. Replacement of DVD Lid Assembly	58
8.18.1. Disassembly of DVD Lid Assembly	58
8.18.2. Assembly of DVD Lid Assembly	59
9 Assembling and Disassembling of Traverse Unit	61
9.1. Disassembly of Traverse Unit	61
9.2. Assembly of Traverse Unit	62
10 Service Position	63
10.1. Checking & Repairing Main/D- Amp P.C.B. & Component Video P.C.B.	63
10.2. Checking & Repairing of SMPS P.C.B.	63
10.3. Checking & Repairing of FL P.C.B.	64
10.4. Checking & Repairing of DVD Module P.C.B.	65
10.4.1. Checking & Repairing of Side B of DVD Module P.C.B.	65
10.4.2. Checking & Repairing of Side A of DVD Module P.C.B.	65
11 Voltage & Waveform Chart	67
11.1. DVD Module P.C.B. (1/4)	67
11.2. DVD Module P.C.B. (2/4)	68
11.3. DVD Module P.C.B. (3/4)	69
11.4. DVD Module P.C.B. (4/4)	70
11.5. Main P.C.B. (1/3)	71
11.6. Main P.C.B. (2/3)	72
11.7. Main P.C.B. (3/3)	73
11.8. FL P.C.B.	74
11.9. SMPS P.C.B.	74
11.10. Component Video P.C.B.	75
11.11. Waveform Table (1/3)	76
11.12. Waveform Table (2/3)	77
11.13. Waveform Table (3/3)	78
12 Illustration of ICs, Transistor and Diode	79
13 Overall Simplified Block Diagram	81
14 Block Diagram	82
14.1. DVD(Servo)	82
14.2. DVD(Audio/Video)	83
14.3. DVD(UP-CON)	84
14.4. System Control	85
14.5. Analog Audio	86
14.6. Digital Audio	87
14.7. Analog Video	88
14.8. Power Supply	89
15 Wiring Connection Diagram	91
16 Schematic Diagram Notes	93
17 Schematic Diagram	95
17.1. DVD Module Circuit	95
17.2. Main/D-Amp Circuit	100
17.3. FL, Volume Button & Power Button Circuit	106
17.4. Component Video Circuit	107
17.5. SMPS Circuit	108
17.6. Voltage Selector Circuit	110
18 Printed Circuit Board	111
18.1. DVD Module P.C.B.	111
18.2. Main/D-Amp P.C.B.	112
18.3. FL, Volume Button, Power Button & Component Video P.C.B.	114
18.4. SMPS & Voltage Selector P.C.B.	115
19 Terminal Function of ICs	117
19.1. IC200 (RFKWMPT75PHK): IC MICROPROCESSOR	117
19.2. IC901(C0HBB0000057): IC FL Driver	117
20 Exploded View and Replacement Parts List	119
20.1. Exploded View and Mechanical Replacement Part List	119
20.1.1. Cabinet Parts Location	119
20.1.2. Packaging	120
20.1.3. Mechanical Replacement Part List	121

Match case Limit results 1 per page

6.4.2.

DVD Module Error Code Table

Error

Code

U702

HDMI/DVI I2C

The communication error of I2C when

Press [

STOP] on main

communication error

connecting it with HDMI/DVI. For

unit for next error.

instance, when EDID information to which

information on the TV set side has been

described cannot be read, it is generated.

U703

HDMI/DVI attestation

When attestation (HDCP) with the TV

Press [

STOP] on main

error

side fails when connecting it with

unit for next error.

HDMI/DVI, it is generated.

U704

HDMI/DVI SRM

It is generated at the equipment to which

Press [

STOP] on main

Riborcerar

the TV set is Riborced when connecting it

unit for next error.

with HDMI/DVI.

U705

HDMI/DVI SRM disk

It is generated at the time of it is time

Press [

STOP] on main

falsification check

when illegal the SRM data of the

unit for next error.

error

reproducing disk (verify error), when

connecting it with HDMI/DVI.

F740

HDMI device key

I2C error when writing HDMI Key device

Press [

STOP] on main

into transmitter.

unit for next error.

F893

FLASH ROM IC data

Firmware error, DV5.0 LSI IC (IC8651)

Press [

STOP] on main

falsification error

error.

unit for next error.

F894

EEPROM IC

When failing in the access to EEPROM

Press [

STOP] on main

abnormality error

IC located in the DVD Module P.C.B.

unit for next error.

(IC8611).

F895

Language area

Firmware version agreement check for

Press [

STOP] on main

abnormal

factory preset setting failure prevention.

unit for next error.

F897 Initialization

Incomplete initialization after writing of

Press [

STOP] on main

error

new firmware (Factory preset setting

unit for next error.

failure prevention)

F899

The communication

Unsuitable combination of number of

Press [

STOP] on main

specification

system com and panel com used.

unit for next error.

disagreement

(Frimware)

between

micro-processor

Diagnosis Contents

Description of error

Automatic FL Display

Remarks