Panasonic SDR H60 Sd/hdd Video Camcorder - Multi Language - Page 36

∫ Screen indications A B SP 0h00m10s R 12h45m C D A Recording mode B Selected recording destination C Remaining time left for recording When the remaining time is less than 1 minute, [R 0h00m] flashes red. D Recording time elapsed Each time the unit enters the recording pause mode, the counter display will be reset to "0h00m00s". ≥ While motion picture recording is in progress, the recording will not stop even if the LCD monitor is closed. ≥ While motion picture recording is in progress, do not disconnect the AC adaptor or remove the battery. If you do, a repair message may be displayed when the power is turned back on. (l 100, About recovery) Audio recording modes [SD] This mode switches the method for recording audio to an SD card. ¬ Select [SD CARD] in [MEDIA SELECT]. Select the menu. (l 28) [SETUP] # [AUDIO REC] # [DOLBY] or [MPEG] [DOLBY] (Dolby AC-3): This is a recording method suitable for copying motion pictures recorded on an SD card to a DVD disc by connecting the unit to a DVD burner. [MPEG] (MPEG-1 Audio Layer 2): This is a recording method suitable for playing back audio using a device conforming to the SDVideo standard. ≥ This unit is not capable of converting the audio recording method after recording motion pictures. By using the supplied software, audio can be recorded in [DOLBY] mode on a disc and in [MPEG] mode on an SD card. ≥ This function's default setting is [DOLBY]. 36 LSQT1394